Votos - 0, Puntuación media: 4
(
)
)
|
Resumen del manual
80 mm (Dia.) 3.0 inch (W) . 3.0 inch (Dia.) Pin Wheel Type: 76 ~ 89 mm (W) 3 ~ 3.5 inch (W) 8 Interface P: Parallel interface (8 Bit) R: Serial interface (RS232C, 20 mA current loop) X: Serial interface (RS422A)*2 9 Input buffer 7K bytes or 2 line buffer 10 Input buffer back-up N Type: Without back-up. B Type: Duration of back-up: More than 100 hours. (But after 10 minutes operation) 11 Paper end detection When paper is near the end, the buzzer actuates and print operation is interrupted, or PE signal is issued. 3 CITIZEN CBM-710/720/730/750 User’s Manual Item CBM-710, 730 CBM-720, 750 12 Validation Print Available only for V-Type (1 line print) 13 Auto cutter Without cutter With cutter Partial cut/Full cut*3 14 Cassette ribbon Two color (Black and Red) print IR-61R/B*4 15 Paper winder Model AW-2 available as option. 16 Power voltage*5 100V ± 10%, 50/60 Hz (For Japan) 115V ± 10%. 60 Hz (For United States) 230V ± 10%, 50/60Hz (For Europe) 17 Power consump. Approx. 30W 18 Operation temp. & humidity 5° to 35°C / 41° to 95°F 10% to 85% RH 19 Storage temp. -20° to 70°C 20 Net weight Approx. 3.1 kg (710) Approx. 3.3 kg (730) Approx. 3.3 kg (720) Approx. 3.6 kg (750) 21 External dimensions Refer to Section 14. Notes: *l Paper weight of 45 kg refers to 1,000 sheets of 788 . 1,091 mm. *2 RS-422A interface specifications are not included in this manual 1. With the RS422A type interface, only a one line input buffer can l selected. 2. However, when the input buffer is set for two lines, back-up of graph data is not possible. *3 Partial cut is three connecting points remaining. Full cut is one connecting point remaining. *4 Single color print ribbon is available as option. Black print: IR-61B Purple print: IR-61P V Type: Use only single color print ribbon. *5 Power voltage setting is performed at the factory. 4 CITIZEN CBM-710/720/730/750 User’s Manual 3.2 Print Format (1) Character Font 7 . 7dot. 23 columns: W = Approx. 1.8 mm 28 columns: W = Approx. 1.5 mm 7. 7 dots (Incl. half-dots) 40 columns: W = Approx. 1.36 mm 7. 7 dots (Incl. half-dots) 3.3 Paper Specifications (1) Form Friction specification : Roll paper 76 -0.5 mm (Width) . 80 mm (Outer dia.) Pin wheel specification: Fan fold paper Width 76 mm (3 inches) ~ 89mm (3.5 inches) (2) Type High quality paper with smooth surface (3) Recommended Paper (Single paper) 45 -55 kg/1000 sheets/1091 . 788 mm (Copy) Non-carbon paper Friction specification: Original 1 + Copy 1, Each 34 kg paper Total thickness: 0.13 mm or less Pin wheel specification: Original 1 + Copy 2 Use only single color print ribbon Total thickness: 0.2 mm or less 5 CITIZEN CBM-710/720/730/750 User’s Manual 4. BLOCK DIAGRAM 6 CITIZEN CBM-710/720/730/750 User’s Manual 5. EXTERNAL APPEARANCE AND PARS DESCRIPTIONS 5.1 CBM-710 External Appearance Fig. 1 Front View Fig. 2 Rear View 7 CITIZEN CBM-710/720/730/750 User’s Manual 5.2 CBM-720 External Appearance Fig. 3 Front View Fig. 4 Rear View 8 CITIZEN CBM-710/720/730/750 User’s Manual 5.3 CBM-730 External Appearance Fig. 5 Front View Fig. 6 Rear View 9 CITIZEN CBM-710/720/730/750 User’s Manual 5.4 CBM-750 External Appearance Fig. 7 Front View Fig. 9 Rear View 10 CITIZEN CBM-710/720/730/750 User’s Manual 5. 5 Part Descriptions (1) Power Cord Attach the connector end to the printer inlet, and insert the plug end into an electric outlet. (2) Inlet This is the electric power inlet. Attach the connector end of the power cord here. (3 ) Power Switch Power is supplied to the printer by turning this switch on. (4) Line Switch When this switch is pressed, the printer enters select (on line) status. When pressed again, the printer enters deselect (off line) status. This switch is also used when clearing an alarm condition. (5) LF Switch Paper feeding is performed when this switch is pressed (in deselect status only). This is used when inserting the paper and for spacing up etc. (6) Power Lamp This lights up when the power switch is "on" and goes out when turned "off". (7) On Line Lamp This lights up when the printer is in select (on line) status, and goes out when in deselect (off line) status. Printing operation is performed only when this lamp is on. (8) Alarm Lamp This lights up when printer operation is abnormal. When in an alarm condition, printing and line feed operations are not performed. (9) Interface Connector Connects through a cable to a computer etc. Please be certain that power to both the printer and the computer are turned off when connection is made. (l0) Connector Cover Covers the connector which is used for the paper winder mechanism (AW-2). (l1) Paper Cover Opens when replacing the paper roll. (l2) Ribbon Cover Opens when replacing the ribbon. (l3) Top Case (l4) Bottom Plate (l5) Printer Cover (l6) Paper-Feed Knob (l7) Bottom Base (l8) Base Stoppers 11 CITIZEN CBM-710/720/730/750 User’s Manual 6. OPERATION 6. 1 Setting and Removing the Paper and Ribbon Covers 1) To open, grasp the sections of the cover with both hands and lift upward. 2) In order to ...
Otros modelos de este manual:Impresoras - CBM-720 (786.72 kb)
Impresoras - CBM-750 (786.72 kb)