Votos - , Puntuación media:
(
)
)
Fabricar: Lanier
Tamaño del archivo: 14.39 kb
Nombre del archivo: cp325.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
2300 Parklake Dr., N. E. Atlanta, GA 30345-2979 Emergency Telephone: (800) 526-4371 MATERIAL SAFETY DATA SHEET Section 1: Chemical Product and Company Information Identity: Product ID: Synonyms & Common Names: Uses: Chemical Cyan Toner for 5711 / 5811 117-0310 Cyan Toner for Lanier 5711, 5811 Lanier 5711, 5811 Color Copier MSDS No. Issued: Supersedes: Date: Prepared by: Approved by: European Contact: CP- 325 9/2/99 None 9/2/99 Lanier QA/EH&S Department 770-493-2361 Larry Choskey, Sr. Quality Assurance Engineer Lanier Worldwide, WSM Europe, Walter Fricke, Im Taubental D-41468 Neuss, Germany +49-2131-387-177 Formula: Mixture Section 2: Composition / Information on Ingredients PERCENT CAS No. EXPOSURE LIMITS SOURCE Polyester resin 85 – 95 % by weight N/a N/a N/a Pigment 1 – 5 % by weight N/a N/a N/a *PEL as the product: 15mg/m3 (total dust), 5mg/m3 (respirable dust) *TLV as the product: 10mg/m3 (total dust), 5mg/m3 (respirable dust) Section 3: Hazards Identification HMIS Rating: FLAMMABILITY = 1 HEALTH = 1 REACTIVITY = 0 SPECIAL = none Health Hazards (Acute, Chronic, Immediate and Potential): Minimum irritation to respiratory tract may occur as with exposure to any non-toxic dust. Inhalation should be avoided. May cause temporary eye discomfort. Health Hazards of Long Term exposure (Chronic): Not known. Section 4: First Aid Measures Remove to fresh air if effects occur. Gargle with water. In case of contact, immediately flush eyes with Inhalation: Get medical attention if needed. Eye Contact: water for 15 minutes. Get medical attention if needed. Skin Contact: Wash with soap and water. Ingestion: Dilute stomach contents with several glasses of water. Get medical attention if needed. Section 5: Fire Fighting Measures Suitable extinguishing media: CO2, dry chemical, foam or water. Unusual Fire and Explosion Hazards: Toner material, like most Extinguishing media which may not be used for safety reasons: none organic material in powdered form, is capable of creating a dust explosion. Flammability: Non-flammable solid The decomposition products are CO, CO2,. Avoid inhalation of smoke. Special protective equipment for fire fighters: none UEL: n/a LEL: n/a Section 6: Accidental Release Measures Spill / leak Procedures: If spilled, sweep up using an approved toner vacuum with a 0.5 micron filter or smaller, such as the Atrix AAA Toner Vacuum or 3M Toner Vacuum. Use of a vacuum cleaner not rated for toner particles, could result in a fire or personal injury. Remove residue with soa...
Otros modelos de este manual:Impresoras - 5711 (14.39 kb)