Votos - 1, Puntuación media: 5 ( )

Fabricar: Sharp Tamaño del archivo: 5.15 mb Nombre del archivo: Idioma del manual:

Set your preferences by switching the tab in the "Print" dialog box. 4 Specify the print settings including the number of copies, media type, and print quality, and then click the "Print" button to start printing. On Windows 95/98/Me/NT 4.0, click the "OK" button to start printing. For details on print settings, see the online manual or the help file for the printer driver. When using the single bypass After appears in the display, wait until the Paper feed location indicator for the single bypass illuminates and insert the paper. The machine will automatically draw in the paper and begin printing. 33 USING THE SCANNER MODE Using the Button Manager Setting up the Button Manager The scanner driver for this unit includes an STI (Still image) driver and WIA (Windows Image Acquisition) driver. You can install software that supports the STI driver and WIA driver to enable scanning using only the operation panel of the unit. The Button Manager accessory software supports the STI driver and WIA driver. Setup that is required in Windows to use the Button Manager is explained in the following. Windows XP 1 Click the "start" button, select "Control Panel" and click "Printers and Other Hardware", and then click "Scanners and Cameras" in the start menu. Right click the "SHARP AL-xxxx" (where xxxx is the model name of your unit) icon and click "Properties" in the menu that appears. 2 3 4 In the "Properties" screen, click the "Events" tab. Click the "Select an event" button and select "ScanMenu SC1" from the pull-down menu. Select "Button Manager (SHARP Personal MFP Series)" in "Start this program" and click "Apply". Repeat step 3 to set "ScanMenu SC2" through "ScanMenu SC6". Click the "Select an Event" button and select "ScanMenu2" from the pull- down menu. Select "Button Manager (Sharp Personal MFP Series") in "Start this program" and click "Apply". Do the same for each ScanMenu through "ScanMenu6". When the settings have been completed, click the "Close" button to close the screen. When the settings have been completed in Windows, start the Button Manager. Adjust detailed settings and then scan an image from the unit. For the procedures for starting Button Manager and adjusting settings, see the online manual or the help file for Button Manager. Windows 98/Me/2000 To scan directly into an application using the Button Manager on Windows 98, Windows Me and Windows 2000. Set the Event Manager properties to send only to Button Manager as shown below. 1 Click the "Start" button, select "Control Panel" from "Settings", and open "Scanners and Cameras" in start menu. In Windows Me, it occasionally happens that the "Scanners and Cameras" icon does not appear immediately after installation of the MFP driver is completed. If the icon does not appear, click "View all Control Panel options" in the Control Panel and display the "Scanner and Cameras" icon. 2 3 Select "AL-xxxx" (where xxxx is the model name of your unit) and click the "Properties" button. In Windows Me,right click "AL-xxxx" (where xxxx is the model name of your unit) and click the "Properties" in the menu that appears. 4 In the "Properties" screen, click the "Events" tab. SHARP AL-xxxx SHARP AL-xxxx P operties 4 Click the "Scanner event" button and select "ScanMenu SC1" from the pull-down menu. Select "Button Manager (SHARP Personal MFP Series)" in "Send to this application" and click "Apply". SHARP AL-xxxx SHARP AL-xxxx P operties If other application are shown, deselect the checkboxes for the other applications and leave only the Button Manager checkbox selected. 5 Repeat step 4 to set "ScanMenu SC2" through "ScanMenu SC6". Click the "Select an Event" and select "ScanMenu SC2" from the pull-down menu. Select "Button Manager (SHARP Personal MFP Series)" in "Start this program" and click "Apply". Do the same for each ScanMenu through "Scanmenu SC6". When the settings have been completed, click the "OK" button to close the screen. When the settings have been completed in Windows, start the Button Manager. Adjust detailed settings and then scan an image from the unit. For the procedures for starting Button Manager and adjusting settings, see "Scan Parameter Settings Dialog Box (p.36)". 35 Scan Parameter Settings Dialog Box After you have completed the Button Manager settings in Windows, configure the scan settings in Button Manager. To configure the scan settings in Button Manager, right click the icon in the Taskbar and select "Settings" from the menu that appears. For details on configuring the scan settings in Button Manager, see the online manual or the help file. This is the corresponding setting in the Button Manager to automatically send multiple images from the SPF/RSPF in full color at 75 dpi to Sharpdesk using the operation panel "SC1" scanner key selection. This dialog shows the SC1 event set to go directly to Button Manager. With the Button Manager set to send the image to Sharpdesk. (factory default setting) Sharpdesk will open after acquiring the image au...

Descargar ahora

Introduzca dos números de la imagen: