Votos - 4, Puntuación media: 4.3 ( )

Fabricar: Panasonic Tamaño del archivo: 2.3 mb Nombre del archivo: KXP3626.PDF Idioma del manual:

( bs* P. 34 “Print Settings”) Resetting to Factory Setting 1 Press (F2l. “Y”: All the screen settings will be reset to the FACTORY settings. “N”: The display will return to the Main screen. ,=< Menu > G* PRINT STYLE' * EMULATION Setup Utility (XXXXXXXXXX) » n=< Item > ^— FONT PITCH * PAGE FORMAT * PRINT MODE * TEXT ENHANCEMENT * CHARACTER SET * INSTALL * INTERFACE * T.O.F. SETTING Factory Setting Are you sure CIÏM [ N ) No « COMMENT » ____■ ■ *•■■■ ■ Select print style. « KEY OPERATION ■ --------------- ■ - [Fl-HELP] [F3=SAVE TO DISK] (F5=PRINT SETTING] [F6=LIST] ¡F2.FACT0RY SETTING] [F4-LOAD FROM DISK] [FtCUSEND TO PRINTER] [ESC=EXIT] 38 (MM) ®3ûoo[°) №x°fè O If ® was selected, you may then perform one of the following operations: Save to Disk — fF3] (us* P. 36) Print Settings — fF5) ( cs3 P. 34) Display Settings — fRT) ( P. 34) Send to Printer — fF10] (us* P. 38) Help If you cannot remember what a particular function does, a HELP program will display to you the explanations of the functions. -| Press (FT) . A Help Item screen will be displayed. 2 Press (f)/ ®/@ / ©• Highlight your desired item. (ex; AGM/IBM) « HELP ITEM » '«AGM/IBM»] «BOLD» «CHARACTERSET> «CODE PAGE» «CSF MOOE> : KEY OPERATION HELP: [Î] I] «EMULATION» «FACTORY SETT1NG> «GRAPHIC DIRECTION? «INSTALL» «INTERFACE» «ITALICS» «LEFT MARGIN» «UNE /INCH» «OUTLINE» [ENTER KEY] «POINT SIZE> «PRINT MODE> «PRINT STYLE» «PRINT WIDTH» «RIGHT MARGIN» «SERIAL» «SHADOW» «SUPER QUIET MODE? «TEXT DIRECTION» «T.O.F. SETTING» «TOP MARGIN» [ESC»EXIT] 0 Press [ Enter] . A definition will be displayed. ^ Press (t) / S) • To move to the previous or next Help item without leaving the display. C Press (ESC) . The Help Item screen will be displayed. -« help item » r«AGMNBM»n «AUTO CR71MB» «AUTOLF» «AUTOLOADING» «AUTO ON UNE» «EMULATION» «POINT SIZE» «FACTORY SETTING» «PRINT MODE» «FONT» «PRINT STYLE» «GRAPHIC OIRECTION» «PRINT WIDTH» «INSTALL» «RIGHT MARGIN» «AGM/IBM» The alternate graphics mode (AGM) will allow you to select Epson graphics while in the IBM mode. If what you printed is not exactly what Is on the screen, but there is a symbol that is replacing the symbol you expect, change the character set. : KEY OPERATION HELP: m j [ENTER KEY] [ESC-EXIT] [I] 0 Press (ESC] . The display will return to the Main screen. 39 Using the Setup Disk Using the Control Panel dMnig) ©MMI [F^gm§D Selecting a Character Font • Press and release [ FONT ). This printer contains resident fonts which are accessible through the Control Panel. You can select any one of the character fonts by pressing the FONT switch on the Control Panel. The combination of FONT indicators indicates the current character font selected, as shown below. EXAMPLES FONT =PROGRAM • • FONT =Bold PS • • FONT FONT =Courier • o FONT • • FONT =Sans Serif =0C R-B O • FONT = Pres t ige O • FONT =Roman • =light is lit o=light is out «slight is blinking | Note: | • When the power is turned off, font will reset to default setting. If you want to save a font selection as your default, you may do so by using the Setup Disk. (cs5 p. 28) ' • You must be in PROGRAM (both FONT indicators are off) to allow your software to control your font ! selection. Selecting a Character Pitch • Press and release ( PITCH ). This printer contains resident pitches which are accessible through the Control Panel. You can select any one of the character pitches by pressing the PITCH switch on the Control Panel. The combination of PITCH indicators indicates the current character pitch selected, as shown on the next page. 40 QMn® ffiûs ©MMl EXAMPLES O O PITCH =PROGRAM • • PITCH =15 CPI O PITCH =10 CPI • O PITCH =17 CPI PITCH =12 CPI •=light is lit o=light is out • =light is blinking Note: • When the power is turned off, pitch will reset to default setting. If you want to save a pitch selection as your default, you may do so by using the Setup Disk. (us3 P. 28) • You must be in PROGRAM (both PITCH indicators are off) to allow your software to control your pitch selection. Super Quiet Mode The Super Quiet mode is a useful feature for further reducing print noise. Your printer has the capability of saving this feature by using the Setup Disk. (B3* P. 28-39) Note: • When enabled, this feature will decrease your print speed. Turning on the Super Quiet mode: While pressing [ ON LINE ), press [TEAR OFF). The SUPER QUIET indicator is on. Turning off the Super Quiet mode: □ ON LINE PITCH „SUPER ljQUIET ON LINE TEAR i-i POWER PAPER OUT While pressing [ ON LINE ]. press [TEAR OFF]. The SUPER QUIET indicator is off. 41 Using the Control Panel Using the Control Panel tütete® ffi© ©scoapsO UfemsO Line Feed/Form Feed You can adjust the paper position by using the front pane! switches when the printer is...

Descargar ahora

Introduzca dos números de la imagen: