Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
GDI and PCL) Click Clients . 7a To Remove unauthorized client(s): • Select clients from the “Share with” list box, then select the REMOVE button. (Select Remove All will unauthorize all current connected clients.) 7b To add authorized client(s): • Select clients from the “Choose from” list box, then select the Add button. (Select Add All will authorize all current and thereafter connected clients to share the printer.) g Click ¡OKI. Printer sharing will be established automatically every time Windows starts up. i Stop Sharing the Printer Resource To stop sharing the KX-P6500 printer resource, perform the following steps: Perform steps 1 to 4 of “Printer Resource Sharing” above. 2 Click off the item(s) that you want to stop sharing. 3 Click [OKI, Connecting a Client PC to a Shared Printer Before a Client can print, the Client must connect to a shared printer resource. To connect to a shared printer resource, the Client must perform the following steps: Л From the Program Manager, double click the Panasonic KX-P6500 Tools icon. 2 Double click the KX-P6500 Console icon. О Click the “Control Panel” tab or “Network’ menu. or “Connect to...”. 23 Installing the Workgroups Software / Printer Resource Sharing I Connecting a Client PC Using the Printer in Windows g Click on the “Remote Printer on” button. 0 Select a Server you want to connect to. Testing the Printer To verify that the software installation was successful, perform the following steps: 'Y The selected server can be used for all your print modes by clicking on “Server of All Virtual Printer” box. g Click [W 1 If you are performing a test print on a personal/server, be sure the printer’s cable is attached to the printer parallel port that was selected during installation. — or — If you are performing a test print on client, make sure the server has been selected for All Print Mode. ( Steps 1-8 above) O Make sure the printer is ready and paper is loaded. From the Program Manager double click the Panasonic KX-P6500 Tools icon. ^ Double click the KX-P6500 Console icon. 5 6 Click the “Control Panel” tab. Click the & TEST (Print Test Page) button. The Print Test Page screen is displayed. 7 Select “Test Page” or “Configuration Page” or both. 8 Click OK . Note: • It is recommended that you close all active Windows appiications before printing a test page, and make sure that there are no print jobs paused in the KX-P6500 Console ( u®5 P. 27). Otherwise, test printing may not be possible. Removing the KX-P6500 for Workgroups Software If you need to remove the KX-P6500for Workgroups software, perform the following. From the Program Manager, double click the Panasonic KX-P6500 Tools icon. 2 Double click the Uninstall Utility icon. Click IÖK The one remaining file (delete.exe) and directory must be manually removed by the user after uninstallation. 24 Using the Printer in Windows Print Mode Selections You can select either of the two print modes, GDI Mode {B5* P. 34) or PCL Mode (i®3 P. 41), according to your requirements. If you cannot determine which print mode is best suited for your printing applications under Windows, we recommend you always use GDI Mode first. When you send a print job to the printer, the printer will determine which language is being used by the print job, and the printer’s personality will automatically switch to that language (GDI or PCL). If the personality is switched, the printer’s memory will be reconfigured and all user-downloaded data will be lost. When the Printer Configuration is Changed_ When the printer is changed to KX-P6500/KX-P6100 ( 03= P. 59), you must select the “Local Printer Change” in the Settings menu in the KX-P6500 Console window ( cs* P. 27, 33). When the RAM Expansion Board option ( t^ P. 58) is installed in the printer, Windows must be restarted. Printing Documents Printing From a Windows Application Once you have selected your print mode (GDI or PCL emulation *), just print from your Windows application as you would to any other printer. * Emulation means to operate like another printer. Printing From a DOS Application Within Windows_ If the KX-P6500 is in PCL Mode, it can print a DOS application file as follows: Double click the MS-DOS icon in the Main window, start the DOS application and print a file. We recommend that you print a DOS application file after exiting Windows because some applications may not allow you to print properly under Windows, GDI Mode has the following features: • faster printing, as much as five times faster for some files • manual duplex printing ( c®5 P. 36) • 1st page on top (reverse order printing) ( P. 35) • overlay ( ds* P. 36) PCL Mode is effective in the following cases: • when you want to print a file created with an MS-DOS application 1 • when you want to print a PCL format file • when you want to print an ASCII formatted file • when you want to print complex graphic files that Windows may not display we...