Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
In following, product specifications and/or user manual content may be changed without prior notice. Rev. 1.00 - 5 - SRP-F310/312 ■ Table of Contents 1. Setting Up the Printer...................................................................................................7 1-1 Unpacking..................................................................................................................7 1-2 Connecting the Cables..............................................................................................8 1-2-1 Serial Interface (RS-232C)............................................................................8 1-2-2 Parallel Interface (IEEE1284)........................................................................9 1-2-3 USB Interface..............................................................................................10 1-3 Connecting the Drawer............................................................................................10 1-4 Setting the Dip Switches..........................................................................................11 1-4-1 Serial Interface.............................................................................................11 1-4-2 Parallel & USB Interface...............................................................................11 1-5 Installing or Replacing the Paper Roll......................................................................12 1-6 Adjustments and Settings........................................................................................14 1-7 Using the Printer......................................................................................................14 1-8 Connecting the computer.........................................................................................15 1-9 Connecting the Power Supply.................................................................................15 2. Self Test.......................................................................................................................16 3. Hexadecimal Dumping...............................................................................................17 4. Specification...............................................................................................................18 5. Appendix.....................................................................................................................19 5-1 Cleaning Printer.......................................................................................................19 Rev. 1.00 - 6 - SRP-F310/312 1. Setting Up the Printer 1-1 Unpacking Your printer box should include these items. contact your dealer for assistance. SRP-F310/312 If any items are damaged or missing, please CD Rev. 1.00 - 7 - SRP-F310/312 1-2 Connecting the Cables You can connect up the three cables to the printer. They all connect to the connector panel on the back of the printer, which is shown below: & NOTE Before connecting any of the cables, make sure that both the printer and the host are turned off. 1-2-1 Serial Interface (RS-232C) ^ When the Dip Switch is "ON” on the Serial Interface Board, DTR and RTS are connected each other. PRINTER SIDE (25P) HOST SIDE (25P) (S.G) 1 (TXD) 2 (RXD) 3 . X -► (DSR) 6 (DTR) 20 (S.G) 7 X 1 (S.G) 2 (TXD) 3 (RXD) 4 (RTS) 5 (CTS) 6 (DSR) 20 (DTR) 7 (S.G) V_ PRINTER SIDE (25P) <-- (S.G) 1 (TXD) 2 (RXD) 3 (DSR) 6 (DTR) 20 (S.G) 7 V_. X X HOST SIDE (9P) 1 (S.G) 3 (TXD) 2 (RXD) 7 (RTS) 8 (CTS) 6 (DSR) 4 (DTR) 5 (S.G) Pin No. Signal name Direction Function 1 FG - Frame Ground 2 TxD Output Transmit Data 3 RxD Input Receive Data 4 RTS Output Ready To Send 5 CTS Input Clear To Send 6 DSR Input Data Set Ready 7 SG - Signal Ground 20 DTR Output Data Terminal Ready Rev. 1.00 - 8 - 1-2-2 Parallel Interface (IEEE1284) SRP-F310/312 Pin No. Source Compatibility Mode Nibble Mode Byte Mode 1 Host nStrobe HostClk HostClk 2 Host / Printer Data 0 (LSB) - Data 0 (LSB) 3 Host / Printer Data 1 - Data 1 4 Host / Printer Data 2 - Data 2 5 Host / Printer Data 3 - Data 3 6 Host / Printer Data 4 - Data 4 7 Host / Printer Data 5 - Data 5 8 Host / Printer Data 6 - Data 6 9 Host / Printer Data 7 (MSB) - Data 7 (MSB) 10 Printer nAck PtrClk PtrClk 11 Printer Busy PtrBusy /Data3,7 PtrBusy 12 Printer Perror AckDataReq/Data2, 6 AckDataReq 13 Printer Select Xflag /Data 1,5 Xflag 14 Host nAutoFd HostBusy HostBusy 15 NC NC NC 16 GND GND GND 17 FG FG FG 18 Printer Logic-H Logic-H Logic-H 19~30 GND GND GND 31 Host nInit nInit nInit 32 Printer nFault nDataAvail /Data0,4 nDataAvail 33 GND ND ND 34 Printer DK Status ND ND 35 Printer +5V ND ND 36 Host nSelectIn 1284-Active 1284-Active Rev. 1.00 - 9 - SRP-F310/312 1-2-3 USB Interface Pin No. Signal Name Assignment (Color) Function Shell Shield Drain Wire Frame Ground 1 VBUS Red Host Power 2 D- White Data Line(D-) 3 D+ Gree...
Otros modelos de este manual:Impresoras - SRP-F310 (682.94 kb)
Impresoras - SRP-F310 (682.94 kb)
Impresoras - SRP-F312 (682.94 kb)