Votos - 2, Puntuación media: 3
(
)
)
|
Fotos y especificaciones Sony DPP-FP30 |
Otros manuales para este modelo:
Resumen del manual
The plug shape and specifications of the AC power cord differ depending on the region you purchased the printer. 7 GB 2Preparing the printing pack (not supplied) To print an image, you need an optional printing pack designed for the printer. The pack contains a set of print paper and a print cartridge. Sizes of print paper You can select the print paper from the following two sizes: • Post card (4 x 6 inch) size (101.6 x 184.4 mm) • 3.5 x 5 inch size (89 x 159 mm)* Optional printing packs Select the printing pack according to the type of printing you intend to do: Post card size SVM-F40P • Two packs with each 20 sheets of Post Card size photo paper • Print cartridge for 40 prints SVM-F80P • Four packs with each 20 sheets of Post Card size photo paper •2 Print cartridges each for 40 prints 3.5 x 5 inch sizebSVM-F40L* • Two packs with each 20 sheets of 3.5 x 5 inch size photo paper • Print cartridge for 40 prints *Note In some regions, 3.5 x 5 inch size print paper is not sold. To order printing packs, visit the following web site: Notes on using printing packs • Always use the print cartridge and print paper from the same carton as a set. If you mix cartridges and paper of different types, printing may not be possible. • The side without the imprinting is the printing surface. Inferior print quality may result if the printing surface is contaminated with dust or fingerprints. Be careful to avoid touching the printing surface. • Do not bend the paper or tear it off at the perforations before printing. • Do not print on used sheets of print paper or attempt to rewind the ribbon inside the print cartridge. Doing so could result in damages to the printer. • Please do not disassemble the print cartridge. Notes on storing printing packs (for quality prints) • When you are going to store a partially- used pack of the print cartridge and print paper for an extended period of time, store it in its original bag or in a similar container. • Avoid placing the printing pack in locations that are subject to high temperature, high humidity, excessive dust, or direct sunlight. • Use printing pack within two years from the date of production. Note on storing printouts • Do not affix cellophane tape or plastic erasers to printouts. Also avoid leaving printouts under plastic desk mats. Caution • TV program, films, video tapes and other materials may be copyrighted. Unauthorized video printing of such materials may be country to the provisions of the copyright law. 8 GB 3Loading the print cartridge 1 Pull and open the cartridge compartment lid. 2 Insert the print cartridge to the back in the arrow direction until it clicks into place. Arrow 3 Close the cartridge compartment lid. Removing the print cartridge When the print cartridge runs out, the ERROR indicator will flash slowly. Open the cartridge compartment lid, push up the eject lever, and remove the used print cartridge. PreparationsEject lever ERROR indicator Notes • Use the print cartridge contained in the same box with the print paper. • Do not touch the ink ribbon or place the print cartridge in a dusty location. Fingerprints or dust on the ink ribbon may result in imperfect printing. Ink ribbon Continued 9 GB • Never put your hand into the cartridge compartment. The thermal head reaches high temperatures, especially after repeated printing. • Do not rewind the ink ribbon and use the rewound print cartridge for printing. Otherwise, proper printing result will not be obtained, or even a malfunction may occur. • If the print cartridge does not click into place, remove it and then re-insert it. If the ink ribbon is too slack to be loaded, wind the ink ribbon in the direction of the arrow to remove the slack. • Do not remove the print cartridge while printing. 4 Inserting the print paper 1 Open the eject paper tray. 2 Slide the paper tray lid in the opposite direction to the paper feeding direction (1) and then lift open it (2). Notes on storing the print cartridge • Avoid placing the print cartridge in a location subject to high temperatures, high humidity, excessive dust or direct sunlight • When you are going to store a partially- used cartridge, store it in its original bag. 3 Set the tray adaptor according to the print paper size you want to use. Note In some regions, 3.5 x 5 inch size print paper is not sold. 10 GB xTo use Post Card (4 x 6 inch) size print paper Press the tray and the back of the tray adaptor to release the locks of the adaptor (1), and remove and lift the tray adaptor from the lock holes (2). 4 Set the print paper into the tray. Riffle the print paper. Then insert the print paper with its printing surface (the side with no imprint) facing up. • To set the Post Card size print Tray adaptor Release the lock. To attach the tray adaptor to the tray Put the projections of the tray adaptor into the lock holes of the front of the tray (1), and then slide down the adaptor until its back lock clicks into place (2). xTo use 3.5 x 5 inch ...