Votos - 3, Puntuación media: 3
(
)
)
|
Fotos y especificaciones Sony DPP-FP35 |
Resumen del manual
The printer may not work properly. • Do not allow the PC connected to the printer to switch to standby mode or hibernation mode during printing. If you do so, the printer may not print properly. • We cannot guarantee operations with all personal computers, even though they may meet or exceed the system requirements. • Picture Motion Browser supports the DirectX technology and the DirectX installation may be required. Installing the printer driver 1 Make sure that the printer is disconnected from the computer. Note If you connect the printer to your PC in this stage, either of the following dialog boxes are displayed: • When using Windows Me: Add New Hardware Wizard • When using Windows 2000/XP: Found New Hardware Wizard If this occurs, disconnect the printer from the PC and then click “Cancel” in the dialog box. 2 Turn on your computer and start Windows. • When installing or uninstalling the software in Windows® 2000 Professional, log on to Windows as “Administrator” or “Power user”. • When installing or uninstalling the software with Windows® XP Professional/Windows® XP Home Edition, log on using a “Computer administrator” user account. Notes • Be sure to close all running programs before installing the software. • The dialog boxes in this section are those in Windows XP Professional, unless otherwise specified. The installation procedures and the dialog boxes shown differ depending on the operating system. 3 Insert the supplied CD-ROM into the CD-ROM drive of your computer. The setup starts automatically and the installation window is displayed. Note In case the installation window is not automatically displayed, double-click the “Setup.exe” of the CD-ROM. 4 Click “Installing Printer Driver”. The “Sony DPP-FP35 - InstallShield Wizard” dialog box appears. 5Click “Next”. The license agreement dialog box is displayed. 20 GB 6 Check “I accept the terms of the license agreement” and click “Next”. If you check “I do not accept the terms of the license agreement”, you cannot proceed to the next step. The “Ready to install the program” dialog box is displayed. 7 Click “Install”. The “Printer connection” dialog box is displayed. 8 Connect the printer to the AC power source (page 16). 9 Press 1 (on/standby) switch to turn on the printer (page 17). The 1 (on/standby) indicator of the printer lights in yellow green. 10 Click “Next”. 11 Connect the USB connectors of the printer and your computer. To USB connector (B-TYPE) Windows PC To USB connector The printer automatically enters the PC mode and the printer setup will start automatically. When the printer setup is complete, the “InstallShield Wizard Complete” dialog box is displayed. Note In case you use commercially available USB cable, use a B-type USB cable shorter than 3m in length. 12 Click “Finish”. The installation of the printer driver is complete. When you are prompted to restart your computer, restart the computer. 13 • To finish installation, click “Complete” and remove the CD-ROM from your computer and keep it for future use. • To continue to install the Picture Motion Browser software, click “Installing the Picture Motion Browser” and follow the procedures on page 23. Continued 21 GB Printing from a PC Notes Notes • If the printer driver CD-ROM is prompted during the installation, specify the following directory: – When using the Windows Me: D:\DRIVER\winme – When using the Windows 2000/XP: D:\DRIVER\win2000.xp “D” stands for the CD-ROM drive of your PC and may differ depending on the system. • The supplied CD-ROM will be required when you uninstall or re-install the printer driver. Keep it in good order for possible future use. • If the installation fails, remove the printer from your computer, restart your computer, and then do the installation procedures from the step 3. • After installation, the “Sony DPP-FP35” is not set as the default printer. Set the printer you use for each application. • Before you use the printer, read the Readme file (the Readme folder of the CD- ROMcEnglish foldercReadme.txt). Checking the installation Open the “Printers and Faxes” (in case of Windows® XP Professional/Windows® XP Home Edition) or “Printers” from the “Control Panel”. When the “Sony DPPFP35” is displayed in the “Printers and Faxes” or “Printers” window, the printer driver has been successfully installed. Uninstalling the printer driver When the printer driver becomes unnecessary, remove it from your PC hard disk as follows: 1 Disconnect the USB cable from your printer and the computer. 2 Insert the supplied CD-ROM into the CD-ROM drive of your computer. The setup starts automatically and the installation window is displayed. 3 Click “Installing Printer Driver”. The “Sony DPP-FP35 - InstallShield Wizard” dialog box appears. 4 Click “Next”. The license agreement dialog box is displayed. 5 Check “I accept the terms of the license agreement” and click “Next”. The dialog box used for confirming uninstallation is displayed. 6 Click “Yes”. The dialog box used for res...