Votos - 5, Puntuación media: 4
(
)
)
|
Fotos y especificaciones Sony DPP-FP55 |
Otros manuales para este modelo:
Resumen del manual
*3 When using the “Memory Stick Micro” with the printer, always insert it into an M2 adaptor. If you insert the “Memory Stick Micro” into the printer without an M2 adaptor, you may be unable to remove the “Memory Stick Micro”. *4 The printer supports FAT32. The printer has been demonstrated as operable with a “Memory Stick” with a capacity of 4GB or smaller manufactured by Sony Corporation. However, we do not guarantee the operations of all the “Memory Stick” media. 84 GB What is “MagicGate”? “MagicGate” is the general name of a copyright protection technology developed by Sony. This technology provides authentication and encryption; mutual confirmation is performed between the “Memory Stick” media and the “MagicGate” compliant device that the other can record and play the copyright- protected data correctly. When the authentication is established, the data encryption is performed. When the data is played, the authentication is also performed. Only when authentication is established, the data is decrypted to the original status and played. Copyright-protected data cannot be played with a device other than authenticated ones. The printer is not equipped with the “MagicGate” technology and cannot read or write the data subject to the “MagicGate” copyright protection. Notes on use • Do not insert multiple “Memory Stick” at the same time, which may cause trouble with the printer. • When using a “Memory Stick”, make sure to check correct insertion direction. Wrong usage may cause trouble with the printer. • Do not place the “Memory Stick Duo” or “Memory Stick Micro” within the reach of a small child to prevent him from swallowing it by accident. • Avoid removing the “Memory Stick” from the printer while the printer is reading or writing data. • Data may be damaged in such occasions: – “Memory Stick” is removed or the printer is turned off during a read or write operation. – “Memory Stick” is used in a location subject to static electricity or electrical noises. • We recommend that you save backup of the important data. • The data processed with the computer may not be played with the printer. • When you format a “Memory Stick”, use the format function of the printer or your digital camera. If you format a “Memory Stick” with your computer, images may not be displayed properly. • When you format a “Memory Stick”, all the data including the protected image files will be erased. To avoid erasing important data by accident, make sure to check the content before formatting. Write-protect switch Connector LOCK LOCK Write protect position Write enable position Place the label here. • You cannot record, edit or delete data if you slide the write-protect switch to LOCK. • When you use a “Memory Stick Duo” without the write-protect switch, be careful not to edit or delete the data by accident. • When you slide the write-protect switch of the “Memory Stick Duo”, use a thin-pointed device. • Do not attach any other material than the supplied label on the labeling position. When you attach the supplied label, be sure to attach it to the labeling position. Be careful that the label does not stick out. • When you write on the memo area of the attached label, do not write forcefully. • When you carry or store the “Memory Stick”, put it in the case supplied with it. • Do not touch the terminal of the “Memory Stick” with your hand or a metal object. • Do not strike, bend or drop the “Memory Stick”. • Do not disassemble or modify the “Memory Stick”. • Do not expose the “Memory Stick” to water. Continued Additional information 85 GB • Do not use or store the “Memory Stick” under the following conditions: – Locations beyond the required operational conditions including locations such as the hot interior of a car parked in the sun or/ and in the summer, the outdoors exposed to direct sunlight, or a place near a heater. – Humid locations or locations with corrosive substances present About the SD card The SD card slot of the printer allows you to use an SD memory card*1 and MMC standard memory card*2. *1 The printer supports FAT32. The printer has been demonstrated as operable with an SD card with a capacity of 2 GB or smaller. To use a miniSD card, you need an adaptor. *2 The printer has been demonstrated as operable with an MMC standard memory card with a capacity of 128 MB or smaller . We do not guarantee proper operations for all types of SD cards/MMC standard memory cards. Notes on use • When using a card, make sure to check correct insertion direction of the card and correct insertion slot. • You cannot read or write the data subject to the copyright protection. (SD card) • Do not strike, drop, or bend a card. • Do not disassemble or modify a card. • Do not expose a card to water. • Avoid using a card in areas subject to high humidity, since it may be easily affected by the humidity. • Do not use or store a card in a location subject to: – extremely high temperature such as the hot inside of a car or the outdoors exposed to a di...