Votos - 4, Puntuación media: 4.3
(
)
)
|
Fotos y especificaciones Sony DPP-FP70 |
Otros manuales para este modelo:
Resumen del manual
On color print packs Notes on use On Ink ribbon • Do not touch the ink ribbon or place the ink ribbon in a dusty location. Fingerprints or dust on the ink ribbon may result in imperfect printing. • Do not rewind the ink ribbon and use the rewound ink ribbon for printing. Otherwise, proper printing result will not be obtained, or even a malfunction may occur. If the ink ribbon does not click into place, remove it and then re-insert it. Only when the ink ribbon is too slack to be loaded, wind the spool of the ink ribbon in the direction of the arrow to remove the slack. • Never disassemble the ink ribbon. • Do not pull out the ribbon from the ink ribbon. • Do not remove the ink ribbon while printing. On print paper • The side without the imprinting is the printing surface. Inferior print quality may result if the printing surface is contaminated with dust or fingerprints. Be careful to avoid touching the printing surface. • Do not bend the paper or tear it off at the perforations before printing. • To avoid paper jam or malfunctions of the printer, make sure the following before printing: – Do not write or type on the print paper. Use the oil ink pen to write on the paper after printing. You cannot type on the print paper using an ink- jet printer, etc. – Do not attach sticker or stamps on the print paper. – Do not fold or bend the print paper. – Total number of print paper does not exceed 20 sheets. – Do not print on the used print paper. Printing an image twice on the same paper will not make the printed image thicker. – Use the print paper for this printer only. – Do not use the print paper ejected without printed. • Do not print on used sheets of print paper or attempt to rewind the ribbon inside the ink ribbon. Doing so could result in damages to the printer. • Do not remove the paper tray while printing. Additional information Continued 71 GB Notes on storing print packs • When you are going to store a partially- used pack of the ink ribbon and print paper for an extended period of time, store it in its original bag or in a similar container. • When you are going to store print paper in the paper tray, make sure to close the tray cover and slide cover. • Avoid placing the ink ribbon in locations subject to high temperature, high humidity, excessive dust, or direct sunlight. Please store it in a dark and cold location and use it early. Depending on the storage status, color elements of the ink ribbon may deteriorate. Sony shall assume no responsibilities for any damage, loss or failed printed results that may be caused by use of such ink ribbon. • Avoid leaving the printing surface of the print paper in contact with a plastic eraser or plastic desk mats that includes vinyl chloride or plasticizer for an extended period of time; color changes or deterioration of the printed image may occur. About the Memory Cards About the “Memory Stick” What is “Memory Stick”? “Memory Stick” is a compact-size IC recording medium with a large capacity. It has been designed not only for exchanging/ sharing digital data among “Memory Stick” complaint products, but also for serving as an insertable/removable external storage medium that can save data. Types of “Memory Stick” that the printer can use With the printer, you can use the following types of “Memory Stick”*3: Memory Stick type Displaying/ Printing Delet- ing/Sav- ing/Formatting Memory Stick (Not compatible with MagicGate) OK OK Memory Stick (MagicGate Compatible) OK*1 OK*1 MagicGate Memory Stick OK*1 OK*1 Memory Stick PRO*2 OK*1 OK*1 Memory Stick Micro (M2*4) OK*1 OK*1 *1 Data reading/recording that requires “MagicGate” copyright protection cannot be performed. “MagicGate” is the general name of a copyright protection technology developed by Sony using authentication and encryption. *2 The printer is equipped with a slot compatible with both standard-size and Duo-size media. Without a Memory Stick Duo adaptor, you can use both standard-size “Memory Stick” and compact-size “Memory Stick Duo”. 72 GB *3 The printer supports FAT32. The printer has been demonstrated as operable with a “Memory Stick” with a capacity of 8GB or smaller manufactured by Sony Corporation. However, we do not guarantee the operations of all the “Memory Stick” media. *4 “M2” is an abbreviation for “Memory Stick Micro”. In this section, “M2” is used to describe “Memory Stick Micro”. For the latest information on available medium or others, access the following home page: support/support.html Select the area where you use your printer, and then select “Digital Printer” from each area page. Notes on use • For the latest information on the “Memory Stick” that the printer supports, see the “Memory Stick” compatibilities information on the Sony web site. • Do not insert multiple “Memory Stick” at the same time, which may cause trouble with the printer. • When using a “Memory Stick”, make sure to check correct insertion direction. Wrong usage may cause trouble with the pr...
Otros modelos de este manual:Impresoras - DPP-FP90 (8.2 mb)