Votos - 3, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
3 Step 2. Understanding Your Printer ................... 5 Step 3. Installing the Imaging Unit, Transfer Belt and Toner Cartridges ............................. 7 Step 4. Loading Paper ..................................... 16 Step 5. Connecting a Printer Cable .................. 19 Using a Parallel Cable .................................19 Using a USB Cable .....................................20 For Networking Printing ..............................21 Step 6. Turning the Printer On ........................ 22 Step 7. Printing a Demo Page .......................... 23 Step 8. Changing the Display Language .......... 23 Step 9. Installing the Printer Software ............ 24 Installing Printer Software in Windows ..........24 Reinstalling Printer software ........................26 Removing Printer software ..........................26 Changing the Display Language ...................26 Step 10. Viewing the User’s Guide ................... 27 In Windows ..............................................27 In Linux ...................................................28 SETUP GUIDE Step 1. Unpacking English1 Remove the printer and all of the accessories from the packing carton. Make sure that the printer has been packed with the following items: Toner Cartridges Power Cord Transfer Belt Imaging Unit CD-ROM Setup Guide SyncThru CD-ROM SyncThru Quick Guide (CLP-500N only) (CLP-500N only) NOTES: • If any items are missing or damaged, notify your dealer immediately. • Components may differ from one country to another. • The CD-ROM contains the printer driver, the User’s Guide, and the Adobe Acrobat Reader program. • The power cord may be different depending on your country. CAUTION: This printer weighs 35kg including developer cartridge and cassette. Use safe lifting and handling techniques. If you need to move the printer it must be moved by two people. Use the lifting handles located as shown in the diagram (see page 5). Back injury could be caused if a single person attempts to lift the printer. 3 SETUP GUIDE 2 Carefully remove all of the packing tapes from the printer. 3 Pull the paper tray out of the printer and remove the packing tapes from the tray. 4 Select a location for the printer: •Leave enough room to open the printer trays, covers, and allow for proper ventilation. •Provide the proper environment: – A firm, level surface – Away from direct airflow of air conditioners, heaters, or ventilators – Free of temperature, sunlight, or humidity extremes or fluctuations – Clean, dry, and free of dust CAUTION: You must place your printer in the level surface. If you do not, the print quality problems can occur. SETUP GUIDE Step 2. Understanding Your Printer These are the main components of your printer: Top Cover Paper Output Tray (Open to install the imaging unit, Output Support Control Panel (refer to Chapter 5 in the User’s Guide which is on the CD- ROM.) and transfer belt.) Front Cover (Open to replace the waste toner container.) Left Cover (To install the toner cartridges press the top cover release button and open fully.) Tray 1 (250-sheet paper feeder) Optional Tray 2 (500-sheet paper feeder) Top Cover Release Button Handle (Lifting handles are located at the lower edge of both sides of the printer.) English 5 SETUP GUIDE Handle (Use it to lift the printer.) Right Cover (Open to remove paper jams.) Muti-purpose Tray (Open to load special print materials.) Optional Tray 2 Jam Cover (Open to remove jams in the optional tray 2.) (Open to install optional Control Board Cover accessories.) Power Switch Power Receptacle * This wireless network port is not supplied with the printer. It is an option that must be purchased and installed separately. ** The network port is fitted as standard on the CLP-500N. CLP-500 users can purchase and install separately an optional Network Card. For details, see the User's Guide of the printer in the CD-ROM. *** The parallel port may not be available depending on your country. SETUP GUIDE Wireless Network Antenna* Network Port** USB Port Parallel Port*** S ETUP G UIDE 7 English Step 3. Installing the Imaging Unit, Transfer Belt and Toner Cartridges 1 Using the handle, completely open the left cover until it is at right angles to the main frame. C AUTION : If the left cover is not completely open, the top cover release button does not press. 2 Press the top cover release button to unlatch the top cover and open it all the way. Top cover release button 3 Take the imaging unit out of the package using the handle. 4 Remove the paper covering the imaging unit by removing the tape under the handle of the imaging unit. CAUTIONS: • Do not use sharp objects, such as a knife or scissors, to open the imaging unit package and tape on the protective paper liner. You could damage the surface of the imaging unit. • To prevent damage, do not expose the imaging unit to light for more than a few minutes. Cover it with black paper, if necessary. • Do not touch the surface of the green roller on the im...
Otros modelos de este manual:Impresoras - CLP-500A (9.71 mb)
Impresoras - CLP-500G (9.71 mb)
Impresoras - CLP-500N (9.71 mb)
Impresoras - CLP-500NA (9.71 mb)