Votos - 5, Puntuación media: 4
(
)
)
|
Resumen del manual
3.Press up/down arrow to highlight Network Configuration and press OK. Using this Network Configuration Report, you can find your machine MAC address and IP address. For example: Setting IP address First, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server located on the network. IP setting using control panel 1.Connect your machine to the network with a network cable. 2.Turned on the machine. 3.Press on the control panel. 4.Press up/down arrow to highlight Network and press OK. 5.Press up/down arrow to highlight TCP/IP (IPv4) and press OK. 6.Press up/down arrow to highlight Set IP Address and press OK. 7.Press up/down arrow to highlight Manual and press OK. 8.The first available menu item, IP Address displays. 9.Use the up/down arrow to enter digits and use the left/right arrow to move between digits. When you finish entering the IP address, press OK. 10.Enter other parameters, such as the Subnet Mask or Gateway, and press OK. 11.After entering all parameters, press to return to ready mode. Now go to "Installing wired network connected machine’s driver" on page 28. IPv4 configuration using SetIP (Windows) Before using the SetIP program, disable the computer firewall from Control Panel > Security Center > Windows Firewall. 1.Install this program from the supplied CD-ROM by double-click Application > SetIP > Setup.exe. 2.Follow the instructions in the installation window. 3.Connect your machine to the network with a network cable. 4.Turn on the machine. 5.From the Windows Start menu, select All Programs > Samsung Printers > SetIP > SetIP. 6.Click the icon (third from left) in the SetIP window to open the TCP/IP configuration window. 7.Enter the machine’s new information into the configuration window as follows. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding. Find the machine’s MAC address from the Network Configuration Report (see "Printing Network Configuration report" on page 26) and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. 8.Click Apply, and then click OK. The machine will automatically print the Network Configuration Report. Confirm that all the settings are correct. IPv4 configuration using SetIP (Macintosh) Before using the SetIP program, disable the computer firewall from System Preferences > Security > Firewall. The following instructions may vary from your model. 1.Connect your machine to the network with a network cable. 2.Insert the Installation CD-ROM, and open the disk window, select MAC_Installer > MAC_Printer > SetIP > SetIPapplet.html. 3.Double-click the file and Safari will automatically open, then select Trust. The browser will open the SetIPapplet.html page that shows the printer’s name and IP address information. 4.Click the icon (third from left) in the SetIP window to open the TCP/IP configuration window. 5.Enter the machine’s new information into the configuration window. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding. Find the machine’s MAC address from the Network Configuration Report (see "Printing Network Configuration report" on page 26) and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. 6.Select Apply, then OK, and OK again. 7.Quit Safari. IPv4 configuation using SetIP (Linux) Before using the SetIP program, disable the computer firewall from System Preferences or Administrator. The following instructions may vary from your model or operating systems. 1.Open /opt/Samsung/mfp/share/utils/. 2.Double-click the SetIPApplet.html file. 3.Click to open the TCP/IP configuration window. 4.Enter the machine’s new information into the configuration window. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding. Find the machine’s MAC address from the Network Configuration Report (see "Printing Network Configuration report" on page 26) and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. 5.The machine will automatically print the Network Configuration Report. Network parameter setting You can also set up the various network settings through the network administration programs such as SyncThru™ Web Admin Service and SyncThru™ Web Service. Restoring factory default settings You may need to reset the machine to the factory default settings when machine that you are using is connected to new network environment. Restoring factory default settings using control panel 1.Press on the control panel. 2.Press up/down arrow to highlight Network and press OK. 3.Press up/down arrow to highlight Clear Settings and press OK. 4.Turn off and restart machine to apply settings. Restoring factory default settings using SyncThru™ Web Service 1.Start a web browser such as Internet Explorer, S...
Otros modelos de este manual:Impresoras - CLP-775ND (12.81 mb)
Impresoras - CLP-775ND/GOV (12.81 mb)
Impresoras - CLP-775N (12.81 mb)
Impresoras - Color Laser Printer w/ Duplex CLP-775 (12.81 mb)