Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Disconnect the USB cable if you want to set up the wireless network using the WPS button. • If you want to set up the wireless network using the USB cable, refer to "Access point via USB cable" on page 172. The next window asks you to check if your access point (or wireless 11 router) supports WPS or not. If the access point (or wireless router) has a WPS button, select Yes and click Next. Follow the instructions in the window to set up the wireless network. 12 • For models with a display screen, follow the steps below: a Press and hold the (WPS) button on the control panel for about 2-4 seconds. The machine waits up to 2 minutes for the WPS button on the access point (or a router) to be pressed. b Press the WPS (PBC) button on the access point (or wireless router). The messages are displayed on the display screen in the order below: -Connecting: The machine is connecting to the access point (or wireless router). -Connected: When the machine is successfully connected to the wireless network, the WPS LED light stays on. 2. Using a Network-Connected Machine 177 Wireless network setup -SSID Type: After completing the wireless network connection process, the AP’s SSID information appears on the display. • For models without a display screen, follow the steps below: a Press and hold the (WPS) button on the control panel for about 2 - 4 seconds until the status LED blinks quickly. The machine starts connecting to the wireless network. The LED blinks slowly for up to two minutes until you press the PBC button on the access point (or wireless router). b Press the WPS (PBC) button on the access point (or wireless router). -The light blinks fast on the WPS LED. The machine is connecting to the access point (or wireless router). -When the machine is successfully connected to the wireless network, the WPS LED light stays on. Wireless network set up is completed. After installation is finished, click 13 Quit. After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installation for Macintosh" on page 134). Ad hoc via USB cable If you do not have an access point (AP), you may still connect the machine wirelessly to your computer by setting up an ad hoc wireless network by following these simple directions. Items to prepare • Network-connected computer • Software CD that was provided with your machine • A machine installed with a wireless network interface • USB cable Creating the ad hoc network in Macintosh Check whether the USB cable is connected to the machine. 1 Turn on your computer and the wireless network machine. 2 Insert the supplied software CD into your CD-ROM drive. 3 Double-click the CD-ROM icon that appears on your Macintosh desktop. 4 Double-click the MAC_Installer folder > Installer OS X icon. 5 Click Continue. 6 Read the license agreement and click Continue. 7 2. Using a Network-Connected Machine Wireless network setup Click Agree to agree to the license agreement. 8 When the message that warns that all applications will close on your 9 computer appears, click Continue. Click Wireless Network Setting button on the User Options Pane. 10 The software searches for wireless network devices. 11 If the search has failed, check if the USB cable is connected between the computer and machine properly, and follow the instructions in the window. After searching the wireless networks, a list of wireless networks your 12 machine has searched appears. If you want to use the Samsung default ad hoc setting, select the last wireless network on the list, which Network Name(SSID) is Portthru and Signal is Printer Self Network. Then, click Next. If you want to use other ad hoc settings, select another wireless network from the list. If you want to change ad hoc settings, click the Advanced Setting button. • Enter the wireless Network Name: Enter the SSID name (SSID is case- sensitive). • Operation Mode: Select ad hoc. • Channel: Select the channel (Auto Setting or 2412 MHz to 2467 MHz). • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. • Encryption: Select the encryption (None, WEP64, WEP128). • Network Key: Enter the encryption network key value. • Confirm Network Key: Confirm the encryption network key value. • WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index. The wireless network security window appears when the ad hoc network has security setting. Select Open System or Shared Key for the authentication and click Next. • WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. The window showing the wireless network settings appears. Chec...
Otros modelos de este manual:Impresoras - SCX-3206W (7.97 mb)
Impresoras - SCX-3400 (7.97 mb)
Impresoras - SCX-3400/ALG (7.97 mb)
Impresoras - SCX-3400/STS (7.97 mb)