Votos - 3, Puntuación media: 4.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
See “Installing the Toner Cartridge” on page 2.4. • You pressed the Cancel button while the printer is receiving data. • In Manual Feed mode, there is no paper in the Manual Feeder. Load paper into the Manual Feeder. • If the printer is receiving data, the On Line/Error LED slowly blinks green. • If the printer is printing the received data, the On Line/Error LED blinks green fast. 6.18 SOLVING PROBLEMS Common Windows Problems Common Windows Problems 6 Note: Refer to Microsoft Windows 9x, Me, 2000, NT 4.0 or XP User’s Guide that came with your PC for further information on Windows error messages. Problem Possible Cause and Solution “File in Use” message appears during installation. Exit all software applications. Remove all software from the StartUp Group, then restart Windows. Reinstall the printer software. “Error Writing to LPTx” message appears. • Ensure that the cables are connected correctly and the printer is on. • If bi-directional communication is not turned on in the driver, it will also cause this message. “General Protection Fault”, “Exception OE”, “Spool32”, or “Illegal Operation” messages appear. Close all other applications, reboot Windows, and try printing again. SOLVING PROBLEMS 6.19 Common Linux Problems Problem I can’t change settings in the configuration tool. Possible Cause and Solution You need to have administrator privileges to be able to affect global settings. I am using the KDE Maybe you do not have the GTK libraries installed. These desktop but the usually come with most Linux distributions, but you may configuration tool and have to install them manually. Refer to your distribution’s LLPR won’t start. installation manual for more details about installing additional packages. I just installed this Some versions of the KDE or GNOME desktop package but can’t find environments may require that you restart your session entries in the KDE/ for the changes to take effect. Gnome menus. I get a “Some options are Some printers have conflicting settings, meaning that not selected” error some settings for two options can’t be selected at the message while editing same time. When you change a setting and the Printer the printer settings. Package detects such a conflict, the conflicting option is changed to a “No Choice” value, and you have to choose an option that does not conflict before being able to submit the changes. I can’t make a printer the system default. • In some conditions, it may not be possible to change the default queue. This happens with some variants of LPRng, especially on recent RedHat systems that use the ‘printconf’ database of queues. • When using printconf, the /etc/printcap file is automatically refreshed from the database of printers managed by the system (usually through the ‘printtool’ command), and the queues in /etc/printcap.local are appended to the resulting file. since the default queue in LPRng is defined as the first queue in /etc/printcap, therefore it is not possible for the Samsung Printer Package to change the default when some queues have otherwise been defined using printtool. • LPD systems identify the default queue as the one named ‘lp’. Thus if there is already a queue by this name, and if it doesn’t have any alias, then you won’t be able to change the default. To work around this, you can either delete the queue, or rename it by manually editing the /etc/printcap file. 6.20 SOLVING PROBLEMS The N-up setting does not work correctly for some of my documents. Problem The N-up feature is achieved through post-processing of the PostScript data that is being sent to the printing system. However, such post-processing can only be adequately achieved if the PostScript data conforms to the Adobe Document Structing Conventions. Problems may arise when using N-up and other features relying on postprocessing if the document being printed isn’t compliant. Possible Cause and Solution I am using BSD lpr (Slackware, Debian, older distributions) and some options chosen in LLPR don’t seem to take effect. Legacy BSD lpr systems have a hard limitation on the length of the option string that can be passed to the printing system. As such, if you selected a number of different options, the length of the options may be exceeded and some of your choices won’t be passed to the programs responsible for implementing them. Try to select less options that deviate from the defaults, to save on memory usage. I am trying to print a document in Landscape mode, but it prints rotated and cropped. Most Unix applications that offer a Landscape orientation option in their printing options will generate correct PostScript code that should be printed as is. In that case, you need to make sure that you leave the LLPR option to its default Portrait setting, to avoid unwanted rotations of the page that would result in a cropped output. Some pages come out all white (nothing is printed), and I am using CUPS. If the data being sent is in Encapsulated PostScript (EPS) format, some earlier versi...