Iniciar sesión:
Votos - 4, Puntuación media: 4.5 ( )

Manual de usuario Samsung, modelo ML-1672

Fabricar: Samsung
Tamaño del archivo: 5.78 mb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Otros manuales para este modelo:
Impresoras - ML-1672 (834.04 kb)

Resumen del manual


Transfer roller Approx. 30,000 pages ROLLER-TRANSFER Fuser unit Approx. 30,000 pages FUSER Pickup roller Approx. 30,000 pages ROLLER-PICK UP To purchase maintenance parts, contact the source where you bought the machine. Replacing maintenance parts can be performed only by an authorized service provider, dealer, or the retailer where you bought the machine. The warranty does not cover the replacement of any maintenance parts once they have reached their “Average yield”. Replacing the toner cartridge Click this link to open an animation about replacing a toner cartridge. When the toner cartridge reaches its estimated cartridge life, •The Printer Status or the Smart Panel program window appears on the computer telling you the toner cartridge needs to be replaced. •The machine stops printing. At this stage, the toner cartridge needs to be replaced. Check the model number for the toner cartridge used in your machine. (See "Available supplies" on page 57.) 1.Open the top cover. 2.Pull the toner cartridge out. 3.Take a new toner cartridge out of its package. 4.Remove the cap protecting the toner cartridge. 5.Slowly shake the cartridge side to side five or six times to distribute the toner evenly inside the cartridge. It will assure maximum copies per cartridge. If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. Do not touch the drum located in the toner cartridge or imaging unit. Use the handle on the cartridge to avoid touching this area. 6.Hold the toner cartridge by the handle and slowly insert the cartridge into the opening in the machine. Tabs on the sides of the cartridge and corresponding grooves within the machine will guide the cartridge into the correct position until it locks into place completely. 7.Close the top cover. Make sure that the cover is securely closed. 10.specifications This chapter covers the machines primary specifications. This chapter includes: •Hardware specifications •Environmental specifications •Electrical specifications •Print media specifications The specification values are listed below: specifications are subject to change without notice: See for possible changes in information. Hardware specifications Item Description Dimension Height 184 mm (7.24 inches) Depth 224 mm (8.82 inches) Width 341 mm (13.43 inches) Weight Machine with consumables 4.71 kg (10.38lbs) Environmental specifications Item Description Noise Levela a.Sound Pressure Level, ISO 7779. Configuration tested: machine basic installation, A4 paper, simplex printing. Ready mode 26 dB(A) Printing mode 49 dB(A) Temperature Operation 10 to 32 °C (50 to 90 °F) Storage (unpacked) 0 to 40 °C (32 to 104 °F) Humidity Operation 10 to 80% RH Storage (unpacked) 20 to 80% RH Electrical specifications Power requirements are based on the country/region where the device is sold. Do not convert operating voltages. Doing so might damage the device and void the product warranty. Item Description Power ratinga 110 volt models AC 110 - 127 V 220 volt models AC 220 - 240 V a.See the rating label on the machine for the correct voltage(V), frequency (hertz) and type of current (A) for your machine. Power consumption Average operating mode Less than 270 W Ready mode Less than 40 W Power save mode Less than 2.8 W Power off mode Less than 0.45 W Print media specifications Type Size Dimensions Print media weightba a.If media weight is over 120 g/m2 (32 lbs), load a paper into the tray one by one. /Capacity Plain paper Letter 216 x 279 mm (8.50 x 11.00 inches) 60 to 120 g/m2 (16 to 32 lbs bond) •150 sheets of 80 g/m2 (20 lbs bond) 60 to 163 g/m2 (16 to 43 lbs bond) •1 sheet for manual feeding in the tray Legal 216 x 356 mm (8.50 x 14.00 inches) US Folio 216 x 330 mm (8.50 x 13.00 inches) A4 210 x 297 mm (8.27 x 11.69 inches) Oficio 216 x 343 mm (8.50 x 13.50 inches) JIS B5 182 x 257 mm (7.17 x 10.12 inches) ISO B5 176 x 250 mm (6.93 x 9.84 inches) Executive 184 x 267 mm (7.25 x 0 inches) A5 148 x 210 mm (5.83 x 8.27 inches) Envelope Envelope Monarch 98 x 191 mm (3.87 x 7.50 inches) 75 to 90 g/m2 (20 to 24 lbs bond) •1 sheet for manual feeding in the tray Envelope No. 10 105 x 241 mm (4.12 x 9.50 inches) Envelope DL 110 x 220 mm (4.33 x 8.66 inches) Envelope C5 162 x 229 mm (6.38 x 9.02 inches) Thick paper Refer to the Plain paper section Refer to the Plain paper section 90 g/m2 (24 lbs bond) •140 sheets 90 to 163 g/m2 (24 to 43 lbs bond) •1 sheet for manual feeding in the tray Thin paper Refer to the Plain paper section Refer to the Plain paper section 60 to 70 g/m2 (16 to 19 lbs bond) •1 sheet for manual feeding in the tray Transparency Letter, A4 Refer to the Plain paper section 138 to 146 g/m2 (37 to 39 lbs bond) •1 sheet for manual feeding in the tray Labelsc c.Smoothness: 100 to 250 (sheffield). Letter, Legal, US Folio, A4, JIS B5, ISO B5, Executive, A5 Refer to the Plain paper section 120 to 150 g/m2 (32 to 40 lbs bond) •1 sheet for manual...

Otros modelos de este manual:
Impresoras - ML-1670 (5.78 mb)
Impresoras - ML-1670K (5.78 mb)
Impresoras - ML-1671 (5.78 mb)
Impresoras - ML-1673 (5.78 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría