Votos - 2, Puntuación media: 5 ( )

Fabricar: Samsung Tamaño del archivo: 4.5 mb Nombre del archivo: Idioma del manual:

Otros manuales para este modelo:

Impresoras - ML-4550 (732.94 kb)

Impresoras - ML-4550 (39.31 kb)

Impresoras - ML-4550 (5.07 mb)

Impresoras - ML-4550 (735.99 kb)

Mostrar todo

Impresoras - ML-4550 (5.38 mb)

Impresoras - ML-4550 (733.19 kb)

Impresoras - ML-4550 (4.92 mb)

Impresoras - ML-4550 (834.04 kb)

The symbol is the group of numbers, marks, and special signs being used when printing letters. Depending on the Typeface setting, available symbol sets vary. Values: ROMAN8 ~ PCCYRIL Point Size When you select one between PCL8 and PCL45 from the Typeface menu, you can determine the font size by setting the height of the characters in the font. Values: 4.00 ~ 999.75 (0.25 unit) Courier This item lets you select the version of Courier font to use. Values: Regular, Dark Item Explanation Pitch When you select one between PCL1 and PCL7 from the Typeface menu, you can determine the font size by setting the number of characters that will print in one horizontal inch of type. The default value, 10 is the best size. Values: 0.44 ~ 99.99 (0.01 unit) Lines This item allows you to set vertical spacing from 5 to 128 lines for the default paper size. The default number of lines may differ according to the paper size and printing orientation. Values: [5 ~ 128]:64 PostScript This menu provides you with the Print PS Error menu item. Item Explanation Print PS Error Values: On, Off You can select whether or not your printer prints an error list when a PS error occurs. •Select On to print PS 3 emulation errors. If an error occurs, the job stops processing, the error message prints, and the printer flushes the job. • If this menu is set to Off, the job is flushed without an indication of the error. EPSON This menu sets the EPSON emulation configuration. Item Explanation Font You can select the default font will be used in EPSON emulation. Values: SANSERIF, ROMAN Character Set This item allows you to select a character set of the desired language. Values: USA, FRANCE, GERMANY, UK, DENMARK1, SWEDEN, ITALY, SPAIN1, JAPAN, NORWAY, DENMARK2, SPAIN2, LATIN Character Tab. This item selects the character set. Values: ITALIC, PC437US, PC850 2.6 Network menu This menu lets you configure the network interface installed in your printer. You can reset the network interface and print a configuration page. For details, see page 4.1. Item Explanation Pitch You can determine the font size by setting the number of characters that will print in one horizontal inch of type. Values: 10, 12, 17.14, 20 LPI You can set the number of lines printed in one vertical inch. Values: 6, 8 Auto Wrap This item determines whether or not the printer automatically performs line feed when the data overflows the printable area of the print meterials. Values: Off, On Item Explanation TCP/IP This item allows you to manually set the TCP/IP addresses or receive the addresses from the network. • DHCP: The DHCP server allots the IP address to you automatically. • BOOTP: The BOOTP server allots the IP address to you automatically. • Static: You can enter IP Address, Subnet Mask, and Gateway manually. Values: DHCP, BOOTP, Static EtherTalk This item lets you select whether or not you use the EtherTalk protocol. Select On to use the protocol. Values: Off, On NetWare This item lets you select the IPX frame type. • Auto: You can set the printer to select the frame type automatically. • 802.2: Select this value to use the IEEE 802.2 frame type. • 802.3: Select this value to use the IEEE 802.3 frame type. • Ethernet II: Select this value to use the Ethernet 2 frame type. • SNAP: Select this value to use the SNAP frame type. • Off: You can disable the NetWare protocol. Values: Auto, 802.2, 802.3, Ethernet II, SNAP, Off Ethernet Speed This item allows you to select the ethernet speed. Values: Auto, 10M Half, 10M Full, 100M Half, 100M Full Clear This item performs a simple reset and restores the Setting factory default settings for the network configuration. This setting will only take effect after you restart the printer. Network Info This item prints a page showing the network parameters you set. 2.7 Printing a demo page After setting up your printer, print a demo page to make sure that the printer is operating correctly. Press and hold Demo for about 2 seconds. Or, 1 Press Menu and then OK when 1. Information appears. 2 Press the Scroll buttons until Demo Page appears and press OK. 3 Press OK when Yes appears. A demo page prints out. Changing the display language To change the language that is displayed on the control panel, follow these steps: 1 Press Menu until 5. System Setup appears on the bottom line of the display and press OK. 2 Press the Scroll buttons until Language appears and press OK. 3 Press the Scroll buttons to select the language you want and press OK. 4 Press Stop to return to Standby mode. Using toner save mode Toner save mode allows the printer to use less toner on each page. Activating this mode extends the life of your toner cartridge and reduces your cost per page beyond what one would experience in the normal mode, but it reduces print quality. This setting is not available with the 1200dpi-Best setting. There are two ways to enable this mode: Using the control panel button Press Toner Save on the control panel. The printer mus...

Descargar ahora

Introduzca dos números de la imagen: