Manual de usuario Canon, modelo PIXMA MP760
Fabricar: Canon
Tamaño del archivo: 1.16 mb
Nombre del archivo:
Idioma del manual:
El documento se está cargando, por favor, espere
El documento se está cargando, por favor, espere
Otros manuales para este modelo:
Resumen del manual
A printer cable is not included. You must purchase a USB cable (less than 10 ft./3 m) to connect your machine to a computer. 2 Connect the power cord. 1 Connect the power cord. 1. Connect one end of the power cord to the rear of the machine. 2. Connect the other end to the AC outlet. 2 If the message appears, go to Step 4, "Install the print head." 3 Load the paper. 1 Open the Paper Support, then pull out the extension. 2 Load a few sheets of letter-size blank paper into the Auto Sheet Feeder. 4 Install the print head. 1 Ensure that the Paper Output Tray is open. Then lift the Scanning Unit (Printer Cover) until it locks into place. IMPORTANT Be sure to hold the Scanning Unit firmly with one hand. 6 Lower the lock lever. 5 Install the ink tanks. 1 Prepare the ink tanks. 2 Insert the ink tanks. 3 Close the Inner Covers and the Scanning Unit (Printer Cover). 6 Align the print head from the Operation Panel. Be sure to align the print head to ensure print quality. 1 Press [OK] to start print head alignment. If the printed pattern matches the illustration, print head alignment is complete. You can change the language displayed on the LCD. For details, see "Selecting The Language For The LCD" in the Quick Start Guide. Hardware setup and print head alignment is complete. If you are connecting the machine to a computer for use, see the rear side of this sheet for instructions on installing the software. Thank you for purchasing the Canon PIXMA MP760. To prepare your machine for use, please follow these Easy Setup Instructions before referring to any other documentation. IMPORTANT Do not connect the USB cable until after the software is installed. See the rear side of this sheet for details. • Machine • Power cord • Print head • Ink tanks Black BCI-3eBK Black BCI-6BK Cyan BCI-6C Magenta BCI-6M Yellow BCI-6Y • Easy Setup Instructions • Quick Start Guide • Setup CD-ROM (Windows: silver, Macintosh: white) The Setup CD-ROM contains the MP Drivers, as well as the User's Guide, Software Guide and Photo Application Guide in electronic format. Please read these guides. 2 Remove shipping tape from the Inner Cover and Open Both Inner Covers. 3 Raise the lock lever. READ THIS SHEET FIRST MP760 (1) Open the Paper Support. (2) Pull out the extension until it stops. Pinch and adjust the paper guide to the width of the stack. Load the paper with the print side face up. Ensure the paper stack does not exceed the paper limit mark. (1) If the Paper Output Tray is not open, press the Open Button. (3) Lift the Scanning Unit. (2) Pull the Scanning Unit Lever. Click Inner Covers The Print Head Holder moves to the center. Do not touch the Print Head Holder while it is moving. Touch only the lock lever! Raise lock lever completely. 4 Prepare the print head. 5 Insert the print head. Do not touch! Remove the protective cap and discard it. (2) Push back. (1) Insert. Do not touch! Lower the lock lever until you hear a click as it locks into place. Click Remove the orange-colored protective film. If it is not removed completely, problems with printing may occur. Remove the protective cap and discard it. Do not touch! Press down until the ink tank clicks into place. Click Bad example. Tank 6Bk is not fully inserted. Make sure to press it down until you hear a click. Good example Close the two Inner Covers. Click Click IMPORTANT Be sure to hold the Scanning Unit firmly with one hand. Pull the Scanning Unit Lever towards you to close the Scanning Unit. (1) This message appears. If this message does not appear after closing the Scanning Unit, see "Aligning The Print Head Automatically" in the Quick Start Guide. (4) The machine will print the print head position pattern and automatically align the print head. (2) Press [ ] to select . (3) Press [OK]. Canon and BCI are registered trademarks and PIXMA is a trademark of Canon Inc. in the United States and may also be registered trademarks or trademarks in other countries. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. HT7-0228-000-V.1.0 © CANON INC. 2004 PRINTED IN CHINA Install the software. Select Easy Install in order to install the application software, electronic manual and MP drivers. Select Custom Install in order to choose the options you would like to install. This sheet explains Easy Install Only. IMPORTANT Temporarily disable any firewall software and close any open applications, including anti-virus software. Computer security programs can be re-started after software installation. The following software programs are included on the Setup CD-ROM: On-screen Manual MP Drivers MP Navigator Easy-PhotoPrint Easy-WebPrint ScanSoft OmniPage SE ArcSoft PhotoStudio IMPORTANT • Do not connect the USB cable until Step 3, “Connect the USB cable.” • You must log on as an administrator or have administrative privileges in order to instal...
)
