Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
to 30 minutes. You can also turn off the energy saver function. (> p. 7-4) • The energy saver function does not activate when the machine is in the following status: – When printing out copies or faxes* or other pages – When sending or receiving faxes* – While a copy job is saved in memory or when the reserve copy or other functions are operating, or when the In Use/Memory indicator lights up* – When paper jams occur – When the platen unit is not returned to the original position – When an error code appears and the Alarm indicator flashes – When PRESS SET KEY is displayed * Only for the imageCLASS D780 model Setting the Energy Saver Mode Manually Press Energy Saver. • The LCD is turned off and the Energy Saver key lights up. • Right after the machine is restored from the energy saver mode, or right after copying finishes, wait NOT. about 5 seconds before pressing Energy Saver. Restoring from the Energy Saver Mode Press Energy Saver. • The Energy Saver key goes off and the machine enters standby mode. • The machine can be restored from the energy saver mode immediately. However, it may vary according NOT. to room temperature and circumstances. Chapter 2 Paper Handling Print Media Requirements For high-quality copies, we recommend using paper and transparencies recommended by Canon. Some types of paper available at office supply stores may not be suitable for this machine. If you have any questions about paper and transparencies, consult your dealer or Canon Customer Relations. Paper Storage In order to prevent paper jams, follow the procedure below: • To prevent moisture buildup, store remaining paper wrapped tightly in its original package. Store paper in a dry location, out of direct sunlight. • To prevent curling, store paper flat, not upright. • After copying, do not leave paper in the Multi-purpose tray. Unacceptable Paper Do not copy on the following types of copy stock; doing so will result in paper jams. • Severely curled or wrinkled paper • Transparencies for full-color copiers or printers • Paper which has already been copied using a digital full-color copier (Do not copy on the reverse side either.) • Paper which has been printed on using a thermal transfer printer (Do not copy on the reverse side either.) • Never attempt to make copies on full-color transparencies. Doing so may result in copier malfunction. IMPORTAN. Acceptable Paper 2 Paper Cassette Multi-purpose Tray Paper size Legal, Letter, A4 Legal (8 1/2”.14”) - 3”. 5” Paper weight 17 - 20-lb bond or 64 - 80 g/m2 16 - 32-lb bond or 56 - 128 g/m2 Type of paper – Plain paper – Colored paper – Recycled paper – Plain paper (17 - 20-lb bond or 64 - 80 g/m2) – Thick paper (21 - 32-lb bond or 81 - 128 g/m2) – Colored paper – Labels – Transparencies – Recycled paper – Tracing paper – Envelopes Printable Areas Please note that the term “printing area” represents both the recommended area for optimum print quality and the entire area where the machine can technically print. Printing area (light shade) : Canon recommends that you print within this area. Paper 0.20 (5 mm) 0.18 (4.5 mm) 0.20 (5 mm) 0.18 (4.5 mm) 0.18 0.18 (4.5 mm) (4.5 mm) FEEDING FEEDING LETTER LEGAL DIRECTION DIRECTION 0.18 0.18 (4.5 mm) (4.5 mm) Envelope 0.20 (5 mm) 0.18 (4.5 mm) 0.20 (5 mm) 0.18 (4.5 mm) 0.18 0.18 (4.5 mm) (4.5 mm) U.S. FEEDING FEEDING 0.18 EUROPEAN DL COMMERCIAL DIRECTION DIRECTION NO. 10 0.18 (4.5 mm) (4.5 mm) • The printing area is 0.20" (5 mm) inside from all four edges of the paper when using this machine as a NOT. printer. Loading Paper Loading Paper e not to cut your hands on the edges of the paper. p. 2-5. 3 4 Load the paper stack beneath the cassette’s length guide . and width guide’s claws .. ) paper is Loading Paper in the Cassette This section describes how to load paper in the cassette. Grip the cassette handle, and pull it out towards you until the cassette comes to a , and remove the If the paper is curled, uncurl it before placing it in the cassette. Failure to do so will cause paper creases and a paper jam. The cassette holds up to approximately 500 ) paper. 2 Paper 2 • Make sure that the paper stack does not NOT. exceed the length and width guides’ claws in the cassette. Failure to do so will cause a paper jam. • Do not load extra paper when there is still paper left in the cassette. • Only load one size of paper into the cassette. Do not load different sizes of paper into the cassette at the same time. • Do not load labels or transparencies into the cassette. Gently insert the cassette as far as it will go. • The cassette is for plain paper, colored NOT. paper or recycled paper only. Loading other paper in the cassette may cause a paper jam. • If copies are curled, or a paper jam occurs, remove the paper stack from the cassette. Turn it over and then place it in the cassette. • If you load paper while making copies, do not load a different paper size. Closing the cassette When closing the cassette, make sure to push it in completely as far as i...