Votos - 3, Puntuación media: 3.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
You cannot connect the computer to the printer using both the parallel cable AND the USB cable. USB cable Printer cable (parallel) • Windows 98, Windows Me, • Windows 95, Windows NT 4.0 Windows 2000 (Can also be used with Windows 98, • Mac OS 8.5 or later Windows Me and Windows 2000.) Recommended: Canon or other computer manufacturer cable, up to 5 meters in length. Should conform with Centronics IEEE 1284 and support bi-directional communication. Recommended: Canon or other computer manufacturer cable, up to 2 meters in length. a a • The USB cable delivers relatively faster printing speeds and is recommended for use with Windows 98, Windows Me and Windows 2000. • If your computer has an earth connection, make sure that this is attached. • If you do not intend to use the printer for a long period of time, unplug the power cord from the power outlet after turning off the printer. Follow the steps below to install the printer driver correctly. 1 Ensure the printer and the computer are switched off. Figure A 2 Connect the cable. Figure A shows the USB cable connection and Figure B shows the printer cable (parallel) connection. Figure B a Note If the Add New Hardware Wizard or Found New Hardware Wizard screen appears when carrying out the following operations, click Cancel and turn off the computer. nn 3 n Installing the PrintHead nnnnnnnnnnnnnnnnnnnnnnn¦ • Never attempt to plug the power cord into the power outlet or unplug the power cord when your hands are wet. • Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy objects on the power cord. • Never use any power supply other than the standard power supply available in the country of purchase. Using the incorrect voltage and frequency could cause a fire or electric shock. • Always push the plug all the way into the power outlet. n Installing the Print Head 1 Plug the printer in. 2 Turn on the printer. Do NOT turn on the computer yet. The POWER lamp flashes and the printer begins to operate. Wait until the POWER lamp remains fully lit. 3 Open the front cover. 4 Remove the tape. 5 Raise the lock lever. Do not touch internal parts other than the lock lever. 6 Remove the protective cap from the print head. aNotes • Do not touch the print head nozzles or electrical contacts. • Do not attempt to reattach the protective cap once it has been removed. 7 Place the print head in the holder. 5 8 Lock the print head into place by lowering the lever. Do not touch the lock lever once the print head has been installed. n Installing the Ink Tanks • For safety reasons, store ink tanks out of the reach of small children. • Do not drop or shake ink tanks. 1 Take out the yellow ink tank. 2 Pull the orange tape in the direction of the arrow and remove the clear film. electrical contacts print head nozzles print head holder print head 3 Hold the ink tank as shown in the 3 Hold the ink tank as shown in the a Notes • Do not squeeze the sides ink port of the ink tanks as this may cause the ink to leak out and stain your clothes and hands. • Do not touch the ink port. • Do not attempt to reattach the protective cap once it has been removed. Black Yellow Magenta Cyan 4 Insert the yellow ink tank into the right- hand slot. Press the top until it clicks into place. 5 Use the same procedure to install the other ink tanks in their appropriate slots. Check the labels to make sure that each tank is in the correct position. a Notes • Only install the ink tanks in the positions specified by the labels. • If ink tanks are not installed in the right position, colours will not be printed correctly. Immediately reinstall the tank in the correct position and carry out print head cleaning. For details, refer to the User’s Guide. 6 Close the front cover. Wait until the POWER lamp remains fully lit (about 60 seconds). nn 4 n Loading Paper nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nn 4 n Loading Paper nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn Loading A4 (Letter) Size Plain Paper 1 Open the front cover. 2 Move the paper thickness lever at the top of the print head holder to the left position. Close the front cover. a Note Set the paper thickness lever to the left when using plain paper, to the right when using thick paper. Refer to the User’s Guide for information on loading envelopes and other media. paper thickness lever print side 3 Load the paper, aligning it with the right side of the sheet feeder. You can load up to 100 sheets of plain paper. Do not exceed this limit. 4 Press the paper guide and slide it against the left side of the stack of paper. You now need to install the printer driver: Windows: Go to page 8 Macintosh: Go to page 10 nn 5 n Installing the Printer Driver nnnnnnnnnnnnnnnnnnnnnn nn 5 n Installing the Printer Driver nnnnnnnnnnnnnnnnnnnnnn Installing the Printer Driver - Windows a Notes • Do not disconnect the cable or remove the CD-ROM during the installation. The driver cannot be correctly installed. • The screens below refer to Windows 98 installation. ...