Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Control panel light pattern Explanation and recommended action Configuration page button is off. The Power light is on. The printer is turned on and idle. It is connected using a USB or parallel cable. No action is required. The printer is turned on and idle. It is connected to a network using a network cable or wireless communication. If the printer is connected using a network cable, check the network connector lights to verify that the printer is connected to the network. See “Interpreting network connector lights” on page 19. If the printer is connected using wireless communication, make sure that the wireless communication settings are set correctly. See “Setting up the printer for wireless communication” on page 21. Verify that the printer is set up properly on the network. See “Problems connecting to a network” on page 20. Configuration page button is green. The printer is connected to a wired network. It is turned on and idle. Power light is on. No action is required. Note: If the printer supports wireless communication but is connected to a wired network, the Configuration page button is not on. See “Interpreting network connector lights” on page 19. 17 18 Configuration page button is blue. Power light is on. The printer is connected to a wireless network. It is turned on and idle. No action is required. Power light is on. Out of Paper light blinks. Resume light blinks. The printer is out of paper. Load paper in the printer, and then press (Resume button) to continue. Power light is on. Paper Jam light blinks. Resume light blinks. Paper is jammed in the printer. Clear the paper jam, and then press (Resume button) to continue. For more information, see the “Maintaining and troubleshooting” chapter in the onscreen user’s guide.” Power light is on. Door Open light is on. A cover is not closed completely. Make sure all covers are completely closed. Power light is on. Door Open light blinks. The rear-access panel or the auto-duplex unit is not inserted completely. Make sure the rear-access panel (HP Business Inkjet 1200) or the auto-duplex unit (HP Business Inkjet 1200d/1200dn/1200dtn/1200dtwn) is inserted completely in the back of the printer. Power light is on. Printhead light is on. The printhead latch is not secured properly. Open the top cover and press down firmly on the printhead latch to ensure that it is secured properly. Also, make sure the protective tape on each printhead has been removed. The Power light, the Ink Cartridge light, and one or more of the color indicator lights are on. One or more of the ink cartridges is missing. Install the ink cartridges and try to print. If the error persists, replace the ink cartridge or cartridges indicated. Power light is on. Printhead light and appropriate color indicator light blink. One or more of the printheads needs attention. Reinstall the printheads and try to print. Try cleaning the printhead contacts. See Maintaining the printheads. If the error persists, replace the printhead or printheads indicated. The Power light, the Printhead light, and one or more of the color indicator lights are on. One or more of the printheads is missing. Make sure that the protective tape on the printhead has been removed. Reinstall the printheads and try to print. 19 English Understanding network connector parts Interpreting network connector lights Note: The printer’s wireless communication is turned off when the printer is connected using a network cable. Power light is on. One or more color indicator lights is on. One or more ink cartridges is low on ink and will need to be replaced soon. No action is required. Power light is on. One or more color indicator lights blinks. An ink cartridge is out of ink and must be replaced before you can continue printing. Replace the ink cartridge indicated. 1) Activity light 2) Network connector 3) Link light 1 2 3 Network light pattern Explanation and recommended action Link light is on. Activity light is off. The printer is connected to the network but is not receiving or transmitting data over the network. The printer is turned on and idle. No action is required. Link light is on. Activity light blinks. The printer is receiving or transmitting data over the network. No action is required. Link light is off. Activity light is off. The printer is turned off or is not connected to the network. If the printer is turned off, turn on the printer. If the printer is turned on and a network cable is connected, see “Problems connecting to a network” on page 20. Problems printing an alignment page Check the printer to ensure the following: . Power light is on and not blinking. When the printer is first turned on, it takes approximately 45 seconds to warm up. . No lights on the control panel are lit or blinking and that the printer is in the Ready state. If lights are lit or blinking, see Printer lights reference. . Ensure power cord and other cables are working and firmly connected to the printer. . All packing tapes and materials are...