Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. • Do not use this printer near the water. • Do not place this printer on an unstable cart or table. If the printer falls it can cause serious damage to the product. • Slots and openings on the cabinet and the back or bottom are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, do not block or cover these openings. The openings should never be blocked by placing the product on a bed, sofa, rug of other similar surface. This printer should never be placed near or over a radiator or heat register. This printer should not be placed in a built-in installation unless proper ventilation is provided. • This printer should be operated by the specified power voltage indicated on the marking label. If you are not sure of the voltage level available, consult your dealer or local electric company. • Do not allow anything to rest on the power cord. Do not locate this printer where the cord will be walked on. • If a extension cord is used with this printer, make sure the total ampere rating on the printer, plugged into a extension cord, dose not exceed the extension cord ampere rating. • Never push foreign object of any kind through the cabinet slots of the printer. • Except as explained elsewhere in this manual, don’t attempt to service this product yourself. Opening and removing those covers that are marked “do Not Remove” may expose you to dangerous voltage points or other risks. Refer all servicing on those compartments to service personnel. • Unplug this printer from the wall outlet and refer servicing to qualified service personnel under the following conditions. A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into the printer. C. If the printer has been expose to rain or water. D. If the printer does not operate properly when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions. Adjustments of other controls may result in damage and often require extensive work by a qualified technician to restore the printer to its proper operation. E. If the printer has been dropped or the cabinet has been damaged. F. If the printer shows a distinct charge in performance. IMPORTANT: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Shielded cable must be used. CONTENTS 1. Introduction................................................. 1.1 Features................................................. 1.2 Accessories............................................ 2. Specifications............................................. 2.1 Type classifications.............................. 2.2 AC adaptor and AC power supply code 2.3 Specifications....................................... 2.4 Diagram of printing location................ 2.5 Block diagram...................................... 3. External appearance and parts name... 3.1 External appearance and name............. 3.2 Explanation on various parts................ 4. Operation.................................................... 4.1 Connection AC adaptor........................ 4.2 Attaching/Removing the ribbon cover . 4.3 Setting the ribbon cassette.................... 4.4 Setting the paper................................... 4.5 Installing the paper guide..................... 4.6 General cautions................................... 5. Interface...................................................... 5.1 Serial interface (RS-232C)................... 1) Specifications............................... 2) Connector assignment.................. 3) Detail of the Input/Output signals 4) Data configuration........................ 5) Error detection.............................. 6) Data receiving control.................. 7) Buffering control.......................... 8) Electrical characteristics............... 6. Function selection (Dip switch setting) .7. Print control function............................... 7.1 Printer built-in function........................ 7.2 Control codes........................................ 7.3 Input date format.................................. 8. Character set.............................................. 8.1 PageO................................................... 8.2 Page 1............................