For more information, see the Card Stock & Label Guid available on the Lexmark Web site av • Do not load too much paper. Make sure the stack height does not exceed the indicated maximum height. •Do not load wrinkled, creased, damp, or curled paper. • Flex, fan, and straighten paper before loading it. •Do not use paper that has been cut or trimmed by hand. •Do not mix paper sizes, weights, or types in the same stack. • Store the paper in an appropriate environment. • Do not remove trays while the printer is printing. Wait for Load tray or Readyto appear before removing a tray. • Do not load the manual feeder while the printer is printini Wait for Load Manual feeder with to appear • Push all trays in firmly after loading paper. • Make sure the guides in the trays are properly positioned, and are not pressing too tightly against the paper. • Make sure all paper sizes and paper types are set correctly in the control panel menu. • Make sure all printer cables are attached correctly. For more information, see the setup documentation. Understanding jam numbers and locations When a jam occurs, a message indicating the jam location appears. The following illustration and table list the paper jams that can Jam numbers Area name Instructions 1 200–203 Door A Open Door A, and then remove the jam. 2 230–231 Door B Open Doors A and B, and then remove any jams. 3 241 Door COpen Door C,and then remove the jam. Open Tray 1, and then remove any jams. 4 242–244 Door DOpen Door D,and then remove the jam. Open Trays 2–4, and then remove any jams. occur and the location of each jam. Open doors and covers, and remove trays to access jam locations. Jam numbers Area name Instructions 5 250 Multipurpose feeder 1 Remove all paper from the multipurpose feeder. 2 Flex and stack the paper. 3 Reload the multipurpose feeder. 4 Adjust the paper guide. 6 280–282 Cover F (Horizontal Transport Unit) Open Cover F, and then remove the jam. 7 283–284 287–288 289 Door G Open Door G, and then remove the jam. For staple jams, remove the paper from the accumulator. Remove the staple cartridge, and then clear the staple jam. 8 284–286 Door HOpen Door H,and then remove the jam. Door His located between the finisher output bins. 9 290–295 ADF cover Open the ADF cover, and then remove the jam. 200–203 paper jams 1 Open Door A by lifting the release latch and lowering the door. CAUTION—HOT SURFACE: The inside of the printer might be hot. Toreduce the risk of injury from a hot component, allow the surface to cool before touching. 1 4 Close Door A. might be hot. Toreduce the risk of injury from a hot component, allow the surface to cool before touching it. CAUTION—HOT SURFACE: The inside of the printer 2 Lift the green lever, and then pull the paper up and toward you. Note: Make sure all paper fragments are removed. 3 Push the green lever down. 4 Close Door A. 5 Touch Continue 230–231 paper jams 1 Open Door A by lifting the release latch and lowering the door. 2 Lift the green lever, and then pull the paper up and toward you. 5 Pull the multipurpose feeder down, and then open Door B. Note: Make sure all paper fragments are removed. 3 Push the green lever down. 2 6 Remove the jammed paper. 2 Pull the paper down and toward you. 242–244 paper jams Note: Make sure all paper fragments are removed. 1 Open Door D. 3 Close Door C. 4 Open Tray 1, and then remove any crumpled paper from the tray. 7 Close Door B. 8 Touch Continue 241 paper jam 1 Open Door C. 2 Pull the paper down and away from the printer. 5 Close the tray. 6 Touch Continue Note: Make sure all paper fragments are removed. 3 Close Door D. 3 4 Clear crumpled paper from Trays 2–4. e Open Tray 4, and then remove any crumpled paper. 250 paper jam a Open Tray 2, and then remove any crumpled paper. 1 Remove the paper from the multipurpose feeder. 5 Touch Continue b Close Tray 2. Open Tray 3, and then remove any crumpled paper. f Open the inside cover, and then remove any jammed paper. 2Flex the sheets of paper back and forth to loosen them, and then fan them. Donot fold or crease the paper. Straighten the edges on a level surface. 3Load the paper into the multipurpose feeder. 4Slide the paper guide toward the inside of the tray until it lightly rests against the edge of the paper. g Close the inside cover, and then close Tray 4. 5 Touch Continue d Close Tray 3. 4 280–282 paper jams Open Cover F. 2 Remove the jammed paper. Note: If the paper jam on the right is difficult to remove, rotate the knob clockwise. 3 Close Cover F. 4 Touch Continue 283–284 and 287–288 paper jams Covers, knobs, and handles located behind finisher Door G Cover, knob, or handle name 1 Cover G1 2 Cover G2 3 Knob G3 4 Cover G4 5 Cover G7 6 Knob G8 7 Handle G9 1 Open Door G. 2 Lift both Cover G1 levers, and then remove any jammed paper. 3 Move Cover G2 to the right, and then remove any jammed paper. Note: If the paper is jammed in the rollers, rotate Knob G3 counterclockwise. 4 Move Cover G4 down, and ...
