Votos - 4, Puntuación media: 4.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Important! • The following procedure applies when you have multiple blocks in a tape label. If there is only one block (no block “FREE DESIGN: Configuring Label Form ¦ To configure block form settings 1. In the Free Design Mode, input the text you want, and divide it into blocks as required. 2. Move the cursor to the block whose form you want to change. • The cursor can be located anywhere within the block. 3. Press FORM. 4. Use and to select BLOCK FORM, and then press SET. 5. Use and to select ONE BLOCK, and then press SET. • Selecting ALL BLOCKS applies your settings to all of the blocks that make up the tape label. 6. Use and to select the setting you want to change, and and to change the currently selected setting. When this is selected: Use and to select the want: DIRECTION • HORZ: Positions text from left to right • VERT: Positions text from top to bottom ALIGN • LEFT: Aligns text flush left. • EQUAL: Equally spaces text to fill the entire space available. • CENTER: Centers text. • RIGHT: Aligns text flush right. • See page 29 for more information. PITCH • Specify a value from 0.0 mm (0") to 31.9mm (1 1/4"). Changing this setting also causes the tape length to change accordingly. • This setting cannot be changed when EQUAL is selected for the ALIGN setting, and when FIX is selected for the B-LENGTH setting. B-LENGTH • AUTO: Automatically adjusts block length in accordance with the number of characters. • FIX: Maintains a fixed block length in the range of 0cm (0") to 99.9cm (39 5/ 16"). See page 27 for more information. • You can also change the DIRECTION setting when creating a label in the Numbering Mode (page 17) and the Enlarged Label Mode (page 19). 7. After all the block form settings are the way you want, press SET. 25 E FREE DESIGN: Unlike the block form settings described in the previous section, label settings are applied if the label consists blocks. ¦ To configure label form settings 1. In the Free Design Mode, input the text you want. 2. Press FORM. • If your label has only one block, the block form settings (page 25) will appear when you press FORM. If you perform the steps under “To configure block form settings” on page 25, the label form settings in step 4 of this procedure will appear when you press SET (or ) to complete the block form setting procedure (step 7 of “To configure block form settings”). 3. Use and to select ALL FORM, and then press SET. 4. Use and to select the setting you want to change, and and to change the currently selected setting. When this setting is selected: Use and to select the option you want: MIRROR • NORMAL: Prints the tape normally. • MIRROR: Prints the tape in mirror image onto special optionally available iron transfer tape. PROPORTIONAL • ON: Automatically adjusts letter spacing to the optional pitch. • OFF: Spaces letters using a uniform pitch. SMOOTHING • ON: Smoothes printed lines to eliminate jagged edges from text and graphics. • OFF: No smoothing performed. When this is selected: Use and to select the want: BL-SPACE • NARROW: 2mm (1/16") block spacing • WIDE: 4mm (3/16") block spacing • NONE: 0mm (0") block spacing MARGINS • NARROW: 6mm ( 1/ 4") margins • NONE: 0mm (0") margins • WIDE: 43mm (1 11/ 16") margins • MEDIUM: 20mm ( 13/ 16") margins • See page 27 for more information. T-LENGTH • AUTO: Automatically adjusts tape length in accordance with the number of characters. • FIX: Maintains a fixed tape length in the range of 0cm (0") to 99.9cm (39 5/ 16"). See page 27 for more information. B-ALIGN • LEFT: Aligns blocks flush left. • EQUAL: Equally spaces blocks to fill the entire space available. • CENTER: Centers blocks . • RIGHT: Aligns blocks flush right. • Note that this setting is available only when FIX is selected for the T-LENGTH setting. See page 29 for more information. • You can also change the MARGINS setting when creating a label in the Numbering Mode (page 17), and the MIRROR setting when creating a label in the Numbering Mode (page 17) or the Enlarged Label Mode (page 19). 5. After all the label form settings are the way you want, press SET. E 26 Margins You can select from four margin settings. Note • All of the margin measurements are approximate. NARROW 3.0mm (1/8") 3.0mm (1/8") MEDIUM 10mm (3/8") 10mm (3/8") WIDE 21.5mm (7/8" ) 21.5mm (7/8") Important! • Margins are not cut in the case of short tape lengths 31mm (1 1/4") for NARROW, 38mm (1 1/2") for MEDIUM, 50mm (1 15/16") for WIDE). After printing, you can use scissors to trim to the margin you want. NONE • Setting with the NONE setting makes it possible to print consecutive labels one after another. • The auto tape cut operation is not performed when NONE is selected for the margins. To cut the tape, press FUNCTION and then CUT. FREE DESIGN: Controlling the Tape Label Tape label length is normally adjusted in accordance and number of the characters in the label. This section explains how you can control the length of your labels. There are two different ways to control labe...
Otros modelos de este manual:Equipo de Taller - CW-L300 (1.65 mb)