Iniciar sesión:
Votos - 1, Puntuación media: 4 ( )

Manual de usuario Xerox, modelo WorkCentre 7228/7235/7245

Fabricar: Xerox
Tamaño del archivo: 555.33 kb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


5. Enter the Administrator’s user name and password, then click [OK]. The Xerox Installer screen opens. 6. Click [Install] to start the installation. 7. Read through the license agreement carefully and if you have no objections to it, click [Accept]. 8. Confirm the Install Location and change it if necessary, then click [Install]. 9. When the dialog box showing installation has completed appears, click [Quit]. This completes the installation. Proceed to Adding a Printer (Mac OS X) on page 53. Adding a Printer (Mac OS X) After the PPD file has been installed, set the PPD file for the printer driver, and then add the printer. The printer driver controls the printer functions based on the information in the PPD file. 1. Make sure that the machine is on. 2. Check that the machine’s port is set to Enable. – When using AppleTalk, set the EtherTalk port to Enable. – When using IP Printing, set the LPD port to Enable. You can check the EtherTalk and LPD settings in the System Settings List. See the User Guide for details about how to print the “System Settings List.” 3. Start [Printer Setup Utility]. NOTE: You can find Printer Setup Utility in the Utilities folder in the Applications folder. Xerox WorkCentre 7228/7235/7245 PostScript® User Guide 5 Operation on Macintosh Computers 4. When the Printer List screen opens, click [Add]. 5. Select the protocol used to connect the printer. When using AppleTalk® 1. Select [AppleTalk] from the menu, and specify the zone for the printer being used. 2. Select the printer you are using from the list. 3. Select [Auto Select] from Printer Model. 4. Click [Add]. When using IP Printing You can select the printer by setting IP address as well as by using Bonjour or Rendezvous. When directly setting IP address, follow the steps below. 1. Select [IP Printing] from the menu, and enter the IP address for the printer being used in Printer’s Address. 2. Enter the IP address or DNS name for the printer in the Printer Address field. Xerox WorkCentre 7228/7235/7245 PostScript® User Guide 5 Operation on Macintosh Computers 3. Select [Xerox] from Printer Model, and select the machine in the [Model Name] list. NOTE: When Finisher C or Finisher C with Booklet Output Tray is installed, select the model number with ‘C’ at the end. 4. Click [Add]. This completes the addition of a printer. When automatically setting the printer by using Bonjour or Rendezvous, follow the steps below. 1. Select [Bonjour] or [Rendezvous] from the menu. 2. Select the printer you are using from the list. 3. Select the required items according to the screen to automatically set the printer. Installable Options This section describes the installable options settings corresponding to the hardware configuration of the printer. For Mac OS 9.x and earlier This section describes the installable options for operating systems Mac OS 9.x and earlier. NOTE: Usually, Installable Options are automatically set according to the bidirectiona...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría