Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
550 Second Street SE Everett, WA 98203 Cedar Rapids, IA 52401 U.S.A. U.S.A. The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation. E 2003 by Intermec Technologies Corporation. All rights reserved. The word Intermec, the Intermec logo, Norand, ArciTech, CrossBar,DataCollection Browser,dcBrowser,Duratherm, EasyCoder, EasyLAN, Enterprise Wireless LAN, EZBuilder, Fingerprint, i-gistics, INCA (under license), InterDriver, Intermec Printer Network Manager, IRL, JANUS, LabelShop, Mobile Framework, MobileLAN, Nor*Ware, Pen*Key, Precision Print, PrintSet, RoutePower, TE 2000, Trakker Antares, UAP, Universal Access Point, and Virtual Wedge are either trademarks or registered trademarks of Intermec Technologies Corporation. Throughout this manual, trademarked names may be used. Rather than put a trademark (™ or ®)symbol in every occurrence of a trademarked name, we state that we are using the names only in an editorial fashion, and to the benefit of the trademark owner, with no intention of infringement. There are U.S. and foreign patents pending. PB41 Printer Quick Start Guide Packing List Checktoensurethatyou receivethese items: S IntermecR PB41A0B240 (4-inch thermal belt ) Printer with Bluetooth radio OR S IntermecR PB41A27040 or PB41A27042 (4-inch thermal belt ) Printer with 802.11b radio S One roll of paper (in printer) S Two Battery Packs (installed) S Compliance Statement S Warranty Card S 802.11b Radio Card (802.11b printer only). Card is packed in a bag taped to the inside of the printer box. *Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. Common Accessories List Cable Part Number Data Cable (Hirose to RJ-11) 321-578-001 Power Adapters Part Number U.S. AC Adapter, 12 volt DC 320-066-042 English AC Adapter, 12 volt DC 320-066-043 European AC Adapter, 12 volt DC 320-066-044 Australian AC Adapter, 12 volt DC 320-066-045 Cigarette Lighter Adapter, 12 volt 320-066-033 Supplies Part Number Replacement Li-Ion 7.2V 2200 mAh Battery 320-088-101 Battery Eliminator 851-074-001 Thermal paper 130’/roll, 50/case 320-081-011 4-Inch Cleaning Cards (100 per pack) 320-070-013 Individual Cleaning Card 320-066-013 PB41 Printer Quick Start Guide Getting Familiar with Your PB41 Printer PB41 Printer with 802.11b Radio Pod Papertearbar Radio On/Off blue illuminating Battery packs button 802.11b radio card pod DC power jack Self-Test button Charge indicator Paper release lever RJ-11port PB41 Printer Quick Start Guide PB41 Printer with Bluetooth Module Papertearbar Radio On/Off blue illuminating Battery packs button DC power jack Self-Test button Charge indicator Paper release lever RJ-11 port PB41 Printer Quick Start Guide Installing 802.11b Radio Card (if applicable) Note: This information applies only if you have a PB41 Printer with an 802.11b Radio. Before installing the 802.11b Radio Card ensure that the protective battery tab strips are in place or remove the batteries before installing the radio card. Your PB41 Printer with an 802.11b radio has been configured at the factory. FCC mandates that the radio card not be installed for shipment. The following information guides you through the process of installing the radio card. The radio card is packed separately in an anti-static plastic bag taped to the inside of the printer box. 1 Remove the radio card cap. 2 With the logo facing down, insert the radio card between the foam and the radio card strap. PB41 Printer Quick Start Guide 3 Carefully push the card into the connector until it is fully seated. 4 Replace the radio card cap. Before Using Your Printer For The First Time Remove the protective tab strips underneath the batteries. They are placed there to keep your printer from discharging during shipment. 5 Push against the battery lock tab and lift the battery up before pulling on the protective tab strips. These tabs prevent the battery contacts from touching and therefore, no charging occurs. 6 If your printer won’t charge after removing the protective tabs, check for and remove any residue in the battery pin area. Batterylocktabs(oneoneachside) CenterbatterysupportpostsBatterypackBatterycontactprotectivetabstrip(oneforeachpack) Batterycontactprotectivetabstrips(removed) PB41 Printer Quick Start Guide Charging the Lithium Ion Batteries S The printer battery charges in about three hours. LED Battery Indicators LED State of Charge Action Solid Red In Progress Waiting for green LED Green Complete Remove Charger Slow Red Flashing Low Temperature or Change environment or battery is disconnected connect battery Fast Red Flashing High Temperature Change environ...