Iniciar sesión:
Votos - 4, Puntuación media: 4.3 ( )

Manual de usuario Epson, modelo MSDS T6244

Fabricar: Epson
Tamaño del archivo: 77.55 kb
Nombre del archivo: t6244.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


3840 Kilroy Airport Way Long Beach, CA 90806 United States Tel: 562-276-1369 Fax: 562-997-5799 The EPSON T6244 Ink Cartridge Epson Quick-Dry Ink is engineered to provide superior photo quality results. 2. Composition Information This is a solvent ink formulation Ink Composition CAS No. % By Weight Proprietary dyes and pigments - <5% Proprietary synthetic polymer - <15% Diethylene glycol diethyl ether 112-36-7 55 – 65% .-Butyrolactone 96-48-0 10 - 20% Tetraethylene glycol dimethyl ether 143-24-8 10 - 20% Proprietary organic additives - <10% 3. Hazard Identification 3.1 Emergency Overview: Ink component is a light yellow liquid that may cause eye irritation. Avoid contact with eyes or clothing. In the case of skin contact, wash with soap and water. Keep out of reach of children. 3.2 Potential Health Effects: Eyes: Ink contact with eye may be mildly irritating. See Section 11 for Toxicology. Skin: Ink contact with skin may cause irritation, swelling, or redness. It is not expected to cause an allergic skin reaction. See Section 11 for Toxicology. Inhalation: Intentional exposure to ink vapors may cause respiratory irritation. See Section 11 for Toxicology. Ingestion: May cause upset stomach. See Section 11 for Toxicology. 4. First Aid Measures 4.1 Eyes: Immediately flush with room temperature, low pressure, clean water for at least 15 minutes. Seek medical attention if eye irritation continues. 4.2 Skin: Wash surface areas with soap and water. Wash soiled clothing before re-wearing. Seek medical attention if irritation continues. 4.3 Inhalation: Remove subject to ventilated fresh air. Consult physician if necessary 4.4 Ingestion: Seek medical attention if stomach continues to be upset. 5. Fire Fighting Measures Flammability: Flash point is 71 deg. C (closed cup, ASTM D3278); combustible liquid under Hazardous Communication Standard (HCS, USA) Extinguishing Media: Dry chemical, carbon dioxide, foam, or water Fire Fighting Instructions: No special fire fighting procedures are required other than breathing apparatus and PPE. No special explosion hazards are known. 6. Accidental Release Measures If a spill occurs, use sponges to wipe-up ink, then rinse area with damp cloth. Place waste in closed container for disposal. Use proper ventilation. Do not dispose of waste to the sewer. Eye or skin protection required during clean- up. Wash hands with soap and water. 7. Precautions for Safe Handling and Use Keep out of reach of children and do not drink ink. Do not store the cartridge in a high or freezing temperatures. Keep cartridge out of direct sunlight. Do not dismantle cartridge. Do not store cartridges with oxidizing agents or explosives. Make sure cartridge is dry before insertion into printer housing. Store in ventilated area without direct/indirect flame. 8. Exposure Controls and Personal Protection Engineering Controls: Use in properly ventilated area Exposure Controls: Use in properly ventilated area California OEL for Diethylene glycol diethyl ether (CAS No. 112-36-7) 8-Hour TWA Exposure Value: 5ppm or 33 mg/m3 Personal Protection: None required when cartridges are used as intended 9. Physical and Chemical Properties of Ink Formulation Appearance: Yellow Liquid Odor: Slight pH: 8.0 – 9.0 Boiling point: No data available Freezing point: Less than 32 deg. F / O deg. C Melting point: Less than 32 deg. F / O deg. C Flash point: 71 deg. C (closed cup, ASTM D3278) Autoflammability: None Explosive properties: Explosive limit, 1.4 – 6.9v/v% as .-Butyrolactone Oxidizing properties: None Vapor density: Greater than 1 (air=1) Relative density: 1.03 at 68 deg. F / 20 deg. C Solubility in water: Soluble Solubility in fat: No data available Partition coefficient: No data available Viscosity: No data available 10. Stability and Reactivity Stability: Stable under normal temperatures Hazardous polymerization: Will not occur Hazard decomposition products: No data available Incompatible materials: Oxidizers and explosives 11. Toxicology and Health Hazards Routes Of Overexposure: Eye, skin, inhalation, and oral Acute Health Hazards: • Overexposure of eye surface to ink may be mildly irritating • Overexposure of skin to ink contact may cause irritation and in some people swelling and redness • Intentional inhalation overexposure to ink vapors may result in respiratory tract irritation and anesthesia • Intentional or accidental oral ingestion may cause an upset stomach Chronic Health Hazards: None known Carcinogenicity: Not containing substances listed in IARC Monographs (1, 2A, 2B) Toxicity Data: Oral LD50 Dermal LD50 Inhalant LC50 OSHA Regulated? >2500mg/kg(Rats) >2000mg/kg(Rats) Not Applicable Not Established 12. Ecological Information No data available on the adverse effects of this material on the environment 13. Disposal Considerations Disposal should be in accordance with federal, state, and local requirements. 14. Transportation Information (for commercial purposes) Not regulated as a Hazardous Material by DOT, IMO, or IA...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría