Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
1
Setting Up a Wireless (Wi-Fi) Connection
Before you connect, you need:
•
a wireles s router.
• to determine whether your wireless router supports Wi-Fi Protected Setup (WPS).
NOTE: If you have specific questions about your router, see your router manufacturer’s documentation.
Connecting to a non-WPS wireless router
Record your network information in the spaces below, using the correct uppercase and lowercase letters.
Network Name (SSID): ____________________________________________________
Security String (case-sensitive): ____________________________________________
NOTE: If you already set up your printer, you need to press Home, then press
to select Network
Settings, then WiFi Setup Wizard. Press OK after each selection.
1. Press
to select Wireless, then press OK.
2. Press
to select your network, then press OK.
If you don’t see your network in the list, or if you want to change your network, select Rescan for
Wireless Networks, then press OK.
If the name of your network is not listed, make sure your wireless router is turned on and within
range. If the name of your network is still not listed, go to www.kodak.com/go/inkjetnetworking.
3. If your network requires a password, use the LCD keyboard to enter your Security String. The
Security String is case-sensitive.
On the control panel (both types of keyboards), press
,
,
or
to select the letters and
numbers, using the correct uppercase and lowercase letters. Press OK after each character. When
you are done, select DONE, then press OK.
2
www.kodak.com/go/aiosupport
...