Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
The following items are normally prohibited from copying by national law. Other items may be prohibited by local law. Money Stamps Bonds Stocks Bank drafts Checks Passports Driver's licenses In some areas, the "POWER" switch positions are marked "I" and "O" on the copier instead of "ON" and "OFF". The symbol "O" denotes the copier is not completely de-energized but in a standby condition at this "POWER" switch position. If your copier is so marked, please read "I" for "ON" and "O" for "OFF". Caution! For a complete electrical disconnection, pull out the main plug. The socket-outlet shall be installed near the equipment and shall be easily accessible. CAUTIONS Caution label on the unit The label ( ) in the fusing area of the unit indicates the following: : Caution, risk of danger : Caution, hot surface Cautions on using Follow the cautions below when using this unit. Warning: • The fusing area is hot. Exercise care in this area when removing misfed paper. • Do not look directly at the light source. Doing so may damage your eyes. • Do not switch the unit rapidly on and off. After turning the unit off, wait 10 to 15 seconds before turning it back on. • Unit power must be turned off before installing any supplies. Caution: • Place the unit on a firm, level surface. • Do not install the unit in a humid or dusty location. • When the unit is not used for a long time, for example for consecutive holidays, turn the power switch off and remove the power cord from the outlet. • When moving the unit, be sure to turn the power switch off and remove the power cord from the outlet. • Do not cover the unit with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat radiation, damaging the unit. • Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. • The socket-outlet shall be installed near the equipment and shall be easily accessible. Important points when selecting an installation site Do not install your unit in areas that are: • damp, humid, or very dusty • exposed to direct sunlight • poorly ventilated • subject to extreme temperature or humidity changes, e.g., near an air conditioner or heater. Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements. Also make certain the outlet is properly grounded. Connect the unit to a power outlet which is not used for other electric appliances. If a lighting fixture is connected to the same outlet, the light may flicker. Be sure to allow the required space around the 20 cm machine for servicing and proper ventilation. 10 cm 10 cm Cautions on handling Be careful in handling the unit as follows to maintain the performance of this unit. Do not drop the unit, subject it to shock or strike it against any object. Store spare toner cartridges in a cool dry place without removing from the package before use. • If they are exposed to direct sunlight or excessive heat, poor copies may result. Do not touch the photoconductive drum (green portion). • Scratches or smudges on the drum will cause dirty copies. Proper storage for supplies Store the supplies (paper and toner cartridges) in a location that is: • clean and dry • at a stable temperature • not exposed to direct sunlight. Store paper in the wrapper and lying flat. • Paper stored out of the wrapper or in packages standing on end may curl or get damp, resulting in paper misfeeds. Trademark acknowledgements • Microsoft and Windows are trademarks of Microsoft Corporation in the U.S.A. and other countries. • IBM and PC/AT are trademarks of International Business Machines Corporation. • Adobe and Acrobat are trademarks of Adobe Systems Incorporated. • All other trademarks and copyrights are the property of their respective owners. Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy efficiency. Laser information Wave length 780 nm +15 nm -10 nm (Four laser diodes) Pulse times 12.88 .s ±12.88 ns/7 mm Output power Max 0.2 mW (Total Power) At the production line, the output power of the scanner unit is adjusted to 0.18 MILLIWATT (Total Power) PLUS 5% and is maintained constant by the operation of the Automatic Power Control (APC). Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 1.2-2001) A small amount of ozone is produced within the unit during operation. The emission level is insufficient to cause any health hazard. Note: The present recommended long term exposure limit for ozone is 0.1 ppm (0.2 mg/m3) calculated as an 8 hr. time-weighted average concentration. However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the unit in a ventilated area. SOFTWARE LICENSE The SOFTWARE LICENSE will appear when you...