Iniciar sesión:
Votos - 3, Puntuación media: 3.7 ( )

Manual de usuario Ice-O-Matic, modelo Hotel Dispenser CD 40022

Fabricar: Ice-O-Matic
Tamaño del archivo: 75.08 kb
Nombre del archivo: ffc7eb1f-2454-66a4-d583-9403d2e3084c.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


(55 Kgs.) of ICE Constructed from sturdy, corrosion-resistant 300 series stainless steel Only 77 inches (2137 mm) tall with ICE machine Only 22 inches (558 mm) wide \ ' CD 40022 ICE-O-Matic ® is the Best ICE Making Solution for: Hard Water, Food Safety and Tight Spaces O Problem Solution Difficult Dispensing Ice is sometimes slow and difficult to dispense Simple Operation • Turbo Dispense - dispenses a 1/4 lb. of ICE per second • Push to Dispense - user friendly dispensing • Smudge Proof Finish - prevents fingerprints and smudges Hard To Clean Power Clean Ice machine must be lifted off of other dispensers for cleaning Allows access to the bin for easy cleaning without moving the ICE machine. Interlock safety switch turns off machine agitation when top-front access panel is removed. Tight-Fitting Spaces Vending area utilization O Maximum ICE Maximum ICE storage in a minimum amount of space with an ultra-low profile Ice Melts Too Fast Maximum Preservation Inadequate storage insulation causes Ice to melt too quickly Hotel Dispenser is insulated with an average of 4 inches of foam for maximum ICE preservation CD 40022 Series Hotel Dispenser Dimensions and Air Flow Air in - 24" (rear of ICE Maker) (610 mm) Air out -(side discharge) (851 mm) (559 mm) I OPERATING LIMITS Ambient Temp. Range Air & Water 50° - 110°F (10° - 43°C) Water Temp. Range 40° - 100°F (4.5° - 38°C) Water Pressure Ice Maker Min. 20 psi (1.4 bar) Water in Max. 60 psi (6.9 bar) Condenser Inlet Water Min. 20 psi (1.4 bar) (Water cooled only) Max. 60 psi (6.9 bar) O O ORDERING AND SPECIFICATION INFORMATION Model No. Dispenser Operated by: ARI Bin Storage Capacity Voltage Characteristics No. of Wires Min. Circuit Ampacity Maximum Fuse Size Shipping Weight lbs. (Kgs.) CD 40022 Push 120 (55) 115/60/1 2 2.1 15 199 (91) CD 40522 Push 120 (55) 230/50/1 2 2.1 15 199 (91) ICE PRODUCTION FOR OPTIONAL CUBE ICE MAKERS — POUNDS (KILOGRAMS) PER 24 HOURS Model ICE 0320 ICE0325 ICE 0520 ICE 0525 Air-Cooled lbs. (kgs.) 320 (145) 301 (137) 506 (230) 478 (217) Water-Cooled lbs. (kgs.) 355 (161) n/a 528 (240) n/a Remote-Cooled lbs. (kgs.) n/a n/a n/a n/a Voltage Char. 115/60/1 2320/50/1 115/60/1 230/50/1 1. Tested at 70° Air/50° Water. 2. All specifications and performance data are subject to normal manufacturing variances. Note #1: Model CD40022 and CD40522 dispensers accept all 22" ICE Series™ Cube ICE Makers Note #2: CD40022 and CD40522 Series units do not require an Adaptor and Bin Level Kit ICE-O-Matic's® machines are not designed for outdoor installations. ICE-O-Matic® remote condensers are designed for outdoor installations. Machine requires voltage indicated on rating name plate. Failures caused by improper voltage are not considered factory defects. Extended periods of operation at temperature exceeding limitations constitutes misuse under the terms of ICE-O-Matic® Manufacturer's Limited Warranty, resulting in a loss of warranty coverage. We reserve the right to make changes in design and construction at any time without obligation. 2004 © ICE-O-Matic Rev Code: 4005A - 11/03-SS ICE-O-Matic 11100 E. 45th Avenue, Denver, CO 80239 Tel. 303 371-3737 Fax. 303 371-6296 www.iceomatic.com...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría