Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
It may be located in any convenient space under a countertop. DO NOT OPERATE FREE-STANDING because the compactor will tip over when the drawer is pulled out. Additional Specifications: A 115 Volt, 60 Hz. power supply is required. An individual properly grounded branch circuit protected by a 15- or 20-amp circuit breaker or time delay fuse is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall. Electrical outlet location is critical for proper cord storage when compactor is installed. If the compactor is to be located in or near a corner of base cabinets, allow 6” minimum clearance from the corner for bag removal on the right side. Locate the outlet 18" min. from the floor, 3" min. fro m either side. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. imagination at work Cl earances: Allow 6" clearance to a vertical wall on the right side for bag removal. Allow 23" at the front for a full drawer opening. Listed by Underwriters Laboratories Specification Revised 10/05 160008 ZCGP150LII - GE Monogram 15" Built-In Compactor for Custom Panels Features and Benefits • Hidden Controls - The controls are hidden behind the compactor door, lending a beautiful designer appearance • Built-In Only - The compactor is built-in to adjacent cabinetry for an upscale appearance • 1.4 Cu. Ft. Capacity - Provides plenty of room for waste items or recyclables • 1/3 HP Motor - Powerful motor provides heavy-duty compacting power • Removable Key Lock - Provides added safety by assuring the drawer remains locked during use • Toe Pedal Opener - Hands-free toe pedal drawer makes it easy to open and load • Automatic Anti-Jam - Operation is easy and reliable, even with a challenging load • Rear Wheels - Allow easy movement and installation • Removable Drawer - Makes it simple to empty and clean • Model ZCGP150LII - Custom panel required imagination at work Specification Revised 10/05 160008...