Iniciar sesión:
Votos - 5, Puntuación media: 4 ( )

Manual de usuario DCS, modelo ADR24

Fabricar: DCS
Tamaño del archivo: 2.77 mb
Nombre del archivo: 239280_RE_access_drawer_Inst.pdf
Idioma del manual:enfr
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


It contains valuable information on how to properly install and maintain your new Professional Access Drawers for years of safe and enjoyable use. To help serve you better, please fill out and submit your Ownership Registration by visiting our website at and selecting “Customer Service” on the home page and then select “Ownership Registration” or submit the enclosed Ownership Registration Card to the address below. In addition, keep this guide handy, as it will help answer questions that may arise as you use your new Access Drawers. For your convenience, product questions can be answered by a DCS by Fisher & Paykel Customer Care Representative at 1-888-281-5698, email: support@dcsappliances.com, or by mail: Fisher & Paykel Appliances, Inc. Attention: DCS Customer Care 5900 Skylab Road Huntington Beach, CA 92647 NOTE: Please write the Model and Serial Number on this page for references (located on the inside, top right of the back wall. See Fig. 02.) MODEL NUMBER SERIAL NUMBER WARNING 1. Do Not store or use gasoline or other flammable vapors and liquids inside or in the vicinity of this or any other appliance. 2. An LP cylinder not connected for use shall not be stored inside or in the vicinity of this unit. FOR YOUR SAFETY 1. Do not allow children or pets to play in or around the Access Drawers. 2. Clean the Access Drawers regularly using a mild dish washing liquid and water. 3. To maintain the exterior appearance, apply a stainless steel polish to the outside surfaces on a regular basis. 4. Sanitize the Access Drawers surfaces each season as necessary. 5. To prevent the formation of mold or mildew, do not store cloth napkins or tablecloths in the Access Drawers for long periods. 6. Cooking utensils that are stored in the Access Drawers should be stored in sealable plastic bags and/or washed each time before re-use. 7. To prevent personal injury or damage to the drawers, do not overload them. The maximum rating per drawer is 75 pounds. WARNING • Closing drawers may cause injury to your hands or fingers. • Always close or open drawers using their handles. • Be sure to keep hands away from drawer edges when opening or closing drawers. TABLE OF CONTENTS SAFETY PRACTICES & PRECAUTIONS 2 MODEL IDENTIFICATION & DIMENSIONS 3 SHIPPING INSPECTION 3 INSTALLATION Make Cutout and Installing Support Structure 4 Removing Drawers 5 Slide in Access Drawers and Mount to Support Structure 5 Re-installing Drawers 6-7 CARE & MAINTENANCE 8 WARRANTY 9-10 SAFETY PRACTICES AND PRECAUTIONS 1. Begin by insuring proper installation and servicing. 2. Follow the installation instructions in this manual. 3. To extend the service life of your product, be sure to follow the use and care guidelines in this manual. WARNING: Do not store items of interest to children above or on the inside of any appliance. Children could be seriously injured if they should climb onto or into the appliance to reach these items. MODEL IDENTIFICATION & DIMENSIONS SHIPPING INSPECTION Fig. 1 Fig. 2 1. Inspect the Access Drawers to verify that there is no shipping damage. 2. If any damage is detected, call the shipper and initiate a damage claim. DCS by Fisher & Paykel is not responsible for shipping damage. NOTE: Do not discard any packing material (box, pallet, straps) until the unit has been inspected. ¦ Operate the drawers to be sure they glide smoothly. ¦ Examine the drawer fronts to be sure there are no dents or scratches. DIMENSIONS MODEL D W H F ADR48 24-1/4” 48” 22” 1-1/2” ADR36 24-1/4” 36” 22” 1-1/2” ADR30 24-1/4” 30” 22” 1-1/2” ADR24 24-1/4” 24” 22” 1-1/2” W F H D Fig. 1a 12-3/16 X 19-3/4 11-1/2 X 19-3/4 17-3/4 X 7-1/8 17-3/4 X 12-1/2 12-3/16 X 19-3/4 12-3/16 X 19-3/4 21-3/8 X 19-3/4 11-1/2 X 19-3/4 17-3/4 X 7-1/8 17-3/4 X 12-1/2 model and serial number tag INSTALLATION MAKE CUTOUT AND INSTALL SUPPORT STRUCTURE 1. Make a cut-out in your cabinet or island with the following dimensions (Fig. 3): Note: The cutout of each corner should be 90. for the Access Drawers to fit properly. A 90. B C Vent* CUTOUT DIMENSIONS MODEL A (+0,-1/8) B (+1/8,-0) C ADR48 46” 20” 24-1/2” min. (all models) ADR36 34” 20” ADR30 28” 20...

Otros modelos de este manual:
Otros aparatos de cocina - ADR30 (2.77 mb)
Otros aparatos de cocina - ADR36 (2.77 mb)
Otros aparatos de cocina - ADR48 (2.77 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría