Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Position the bin covers so that the front flange of the bin cover will lock under the front lip of the dispenser. Adapter may have to be moved towards the back of the dispenser. 3. Reposition support, if necessary, so front of support lines up with front of adapter. 4. Using the slotted holes in the adapter as a template, drill four (4) 9/64” diameter holes at the bottom of the slots. NOTE: Do not drill deeper than 1/4” past the sheet metal. Use a drill stop! 5. Fasten adapter to dispenser using the four (4) #8 screws supplied with the adapter kit. 6. Position adapter retaining arm holes over rivnuts. 7. Set the ice machine on top of the adapter. Align holes in ice machine front angle with the rivnuts on the adapter. 8. Secure the ice machine to the adapter with two (2) #8-32 screws supplied with the kit. 9. Set the front bin covers onto the dispenser. Set the left side cover down first and then the right side cover. The covers will latch together at the center seam and also to the adapter along the back flange of the covers. 10. Rotate retaining arms into position, as shown for normal ice machine operation. Manitowoc Ice, Inc. 2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8006763 Web Site - Rev. 06/17/03...