Votos - 2, Puntuación media: 5 ( )

Fabricar: Follett Tamaño del archivo: 3.69 mb Nombre del archivo: Idioma del manual:

(407mm) (458mm) 1000 series - 28.6" min. (727mm) 1400 series - 31.6" min. (303mm) 24.5" min. (623mm) No Lip . . . . . 1.75" (45mm) CROSSBRACE Undercounter installation detail – Horizon 1000 & 1400 series CAUTION • Keep ventilation openings in the appliance enclosure clear of obstruction. • To ensure proper ventilation (if not using supplied grille) carefully review air circulation specifi cations on facing page (4.1) 10 self-contained DROP-IN • SATELLITE-FILL Ice transport tube Install the ice transport tube. 5 208264 Stock Module Identification Plate Service No. Module No. Product OMRESSOR THERMALLY PROTECTED Easton Pennsylvania AMPS AMPS VOLTS PHASE SINGLE CHARGE LOW SIDE PART NO PSIG THE USA MADE IN OZ R C R HZ UL L NSF U Hot Water . 1/4. 1' . . . . . . Ice transport tube tips • Insulate entire length of ice transport tube . • Secure ice transport tube . as needed to prevent dips and traps from forming. For long tube runs see guide on page 16. • Pitch tube at least 1/4" per foot (6,4mm/.3m) . • Ice transport tube must drain towards icemaker Ice transport tube to Icemaker • Be sure tube ends are square . • Soften ice transport tube with hot water (160 F (71 C)) to ease assembly . • Push ice transport tube onto icemaker nipple . • Install hose clamp . 5.1 Ice transport tube installation. DROP-IN • SATELLITE-FILL self-contained 11 Connect utilities to louvered docking assembly. External connections 6 . . . . . . • Remove access panel if necessary • Install drain line .. The rigid drain line from the icemaker must have at least 1/4" per foot pitch (6,4mm/0,3m). • Install icemaker potable water supply . • Replace access panel Air-cooled icemakers only • Remove access panel if necessary • Install drain line .. The rigid drain line from the icemaker must have at least 1/4" per foot pitch. • Connect cooling water supply . and return . • Install ice machine potable water supply . • Replace access panel 6.1 6.2 Water-cooled icemakers only 12 self-contained DROP-IN • SATELLITE-FILL Connect louvered docking assembly to icemaker. Internal connections 7 • Remove twist tie • Carefully pass plug thru opening and plug into wall outlet 7.3 Power cord . . • Slide icemaker into louvered docking assembly . • Insert ice transport tube all the way into coupling and tighten nut firmly . 7.1 Ice transport tube . . . . • Insert potable water line into valve . • Push drain line over hose barb on back of evaporator mount . 7.2 Potable water and drain lines Air-cooled icemakers – follow steps 7.1 through 7.4. • Position plate into opening and secure with supplied screw 7.4 Power cord CAUTION • Plug must be accessible after fi nal installation. • HCE1400A/W 230/50/1) requires a 20 amp circuit (4.00 mm2 wire) DROP-IN • SATELLITE-FILL self-contained 13 . . . . • Insert potable water line into valve . • Push drain line over hose barb on back of evaporator mount . 7.7 Potable water and drain lines In Out • Install icemaker cooling water lines to louvered docking assembly 7.5 C...

Descargar ahora

Introduzca dos números de la imagen: