Votos - 3, Puntuación media: 4.7 ( )

Fabricar: Bloomfield Tamaño del archivo: 140.38 kb Nombre del archivo: Idioma del manual:

763 p/ n 77719 OpManual Decanter Warmers Do not discard this appliance as usual trash at the end of its useful life. Recycle properly. AGENCY LISTING INFORMATION This warmer is listed under UL file E9253. C US C US This brewer meets Standard 4 only when installed, LISTED E9253 operated and maintained in accordance with the enclosed instructions. STD 4 3 INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS READ THIS CAREFULLY BEFORE STARTING THE INSTALLATION CAUTION: EQUIPMENT DAMAGE DO NOT plug in or energize this appliance until all Installation Instructions are read and followed. Damage to the Brewer will occur if these instructions are not followed. CAUTION: UNSTABLE EQUIPMENT HAZARD It is very important for safety and for proper operation that the brewer is level and stable when standing in its final operating position. Provided adjustable, non-skid legs must be installed at each corner of the unit.. Failure to do so will result in movement of the brewer which can cause personal Injury and/or damage to brewer. Unpack the unit. Inspect all components for completeness and condition. Ensure that all packing materials have been removed from the unit. Verify that the Spray Head Gasket and Spray Disk are properly installed. LEVELING THE UNIT Verify that slip-resistant foot is installed at each corner of the warmer. Set warmer in its operating location. Level the warmer. A spirit level should be placed on the top of the unit, at the edge, as a guide when making level adjustments. ELECTRICIAN’S INSTALLATION INSTRUCTIONS REFER TO ELECTRICAL SPECIFICATIONS -Page 1 Check the nameplate to determine correct electrical service required for the Brewer to be installed. Warmer models 8708, 8851, 8852, 8871 and 8872 are equipped with a cord and plug. They require a 115 - 125 volt 15 amp circuit (50/60 Hz, 2 wire plus ground, with NEMA 5-15R receptacle). WARNING: SHOCK HAZARD Brewer must be properly grounded to prevent possible shock hazard. DO NOT assume a plumbing line will provide such a ground. Electrical shock will cause death or serious injury. IMPORTANT: The ground prong of the plug is part of a system designed to protect you from electrical shock in the event of internal damage. Never cut off the ground prong nor twist a blade to fit an existing receptacle. Contact a licensed electrician to install the proper circuit and receptacle. 763 p/ n 77719 OpManual Decanter Warmers 4 OPERATION OPERATION Place a decanter of hot beverage on a warmer plate. Press warmer switch for that warmer plate to ON ( I ). Press warmer switch to OFF (O) when a warmer plate is not in use for any extended period. SUGGESTION: Coffee loses its fresh flavor if allowed to set on a warmer for too long. Discard stale coffee promptly. DO NOT allow an empty decanter to set on a hot warmer. This will damage the decanter. Discard any decanter that has been allowed to boil dry. Disconnect warmer from electric power if unused for prolonged periods (i.e. overnight). CAUTION: BURN HAZARD Expos...

Descargar ahora

Introduzca dos números de la imagen: