Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
serve@Home System Interface Safety information . The system interface complies with the safety specifications for electrical appliances. Repairs may only be carried out by customer service engineers trained by the manufacturer. Inexpert repairs can cause serious hazards. . Never open the device casing under any circumstances. The manufacturer will not accept any liability for damage resulting from improper handling. . Do not use the device if you have discovered transit damage or if the device is damaged. . Keep the instructions in a safe place. If you pass on the device, also give the new owner the instructions. . Thunderstorms are a danger to all electrical devices. A lightning strike to the mains can damage the system interface. During thunderstorms you must disconnect the home appliance and the system interface from the mains. Safety information . Protect the system interface from moisture and water. Should the system interface become wet, it may not be inserted in the home appliance under any circumstances. Dab the system interface dry and then let it dry out for at least 24 hours. Only use it once it is completely dry. . Do not use or store the system interface in a dusty or dirty environment. . Do not use the system interface in damp rooms such as basements or garages. . Do not store the system interface in hot places. High temperatures can shorten the service life of electronic devices. . Do not store the system interface in cold places. If it then warms up to its normal operating temperature, condensation may form inside it, damaging its electronics. . Do not drop the system interface and do not subject it to impacts or shocks. Careless handling can damage the circuit boards inside the device. The system interface . The system interface (HZ 319000) is the communications module for your serve@Home appliance. For every serve@Home appliance you require one system interface. . The system interface enables the control and transmission of status and warning messages from the serve@Home appliance via the domestic mains network (power line). . Operating the system interface requires you to have a serve@Home appliance and the serve@Home system components (infoModule, and/or a gateway + power line interface) and that you have successfully registered the system interface on one of the serve@Home system components. (Please refer to the corresponding chapter in the operating manual of the serve@Home system components). . The system interface shows its operating status with an LED. . Data is transmitted from the system interface to the serve@Home system components via the normal mains electricity network. No additional wiring is necessary. . You can find detailed information on the serve@Home range of domestic appliances at or Overview of the system interface . The system interface shows its operating status with an LED. . Various flashing codes are displayed. . If the button is pressed the system interface is r...
Otros modelos de este manual:Otros aparatos de cocina - HZ319000/02 (138.56 kb)
Otros aparatos de cocina - HZ319000/03 (138.56 kb)