Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
GB PRODUCT DESCRIPTION (fig. 1) A water tank G automatic mug button for pre-setting B tank lid quantity C water release valve H manual “continuous water supply” button D body of the appliance I water volume selector (according to model) E nozzle or water outlet J filter cartridge (according to model) K ON/OFF and filter cartridge change light (according to model) RINSING BEFORE USING FOR THE FIRST TIME 1 Remove all of the packaging, stickers and accessories from the interior and exterior of the appliance. 2 Remove tank A and clean it in water, taking care that no particles remain in the tank. 3 Then fill the tank A with cold water and reposition it firmly on its base D making sure that the release valve C is properly engaged (fig. 1a, 1B and 2). 4 Plug in the appliance to an electrical supply of the correct voltage. 5 Place a container that holds approximately 1.5 litre under tap E 6 Press the continuous water supply button H: hot water will begin to run out (fig. 3). When operating for the first time, it is normal that a little steam escapes from nozzle E. 7 When the container is almost full, release the continuous water supply button H to stop the flow. Discard the water. INSTALLING THE CLARIS FILTER CARTRIDGE (according to models) • We advise you to get the best taste and service lifetime of your appliance by using the Claris -Aqua Filter System cartridge. This cartridge contains an anti-lime substance and activated carbon that reduces chlorine, impurities, lead, copper, pesticides, etc. that are present in water. Minerals and trace elements, however, are preserved. 1 Unwrap cartridge J. Take note of the month in which the cartridge is put in use by sliding the upper ring of the filter to the use start date (fig. 4). You should change your Claris Filter Cartridge every 4 to 6 weeks (or every 50 litres), according to the hardness of your water. Certain models also have an indicator light K which indicates when it is necessary to change the cartridge. For these models, when this light K flashes during use, it is time to change the cartridge (fig. 5). 2 Position the cartridge in tank A and screw the cartridge J a quarter turn into the bottom of the tank. 3 To replace the cartridge, remove the used cartridge and fit a new Claris Aquafilter system cartridge sold as an accessory (Ref. XH 5000) (fig. 6). 4 For models with an indicator light, it is necessary to record the change of the cartridge by simultaneously pressing the “continuous water supply” button and the mug pre-select button G for 5 seconds (fig. 7). After 5 seconds, the indicator light will go out. The appliance will then have recorded the cartridge change. • The Claris AquaFilter cartridge can be installed in all Tefal water urns, including those that did not have it on purchase. 11 CLEANING AND MAINTENANCE Do not immerse the • Systematically disconnect the power supply cord before any maintenance GB appliance in water operation. Then clean the appliance with a damp cloth. Do not put the appliance in the dishwasher What to do if there is a PROBLEM Problems Probable causes Corrective actions Appliance makes a strange noise No more water left in tank Fill tank Water flows too slowly or not at all Tank is incorrectly fitted Not enough water in tank Press the tank firmly to engage again Fill tank The tank is not fitted correctly Press the tank firmly to engage again The appliance is coated with scale Descale appliance Water is cold The appliance is coated with scale Descale appliance IF YOUR APPLIANCE IS DROPPED, HAS LEAKS OR IF THE POWER SUPPLY Do not use the appliance. CORD OR PLUG ARE VISIBLY DAMAGED No attempt must be Return your appliance to your authorised Service Centre. See the warranty made to disassemble conditions and the list of centres in the handbook provided with your the appliance or safety appliance. devices. The type and series number are shown on the base of your model. This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply. IMPORTANT: SAFETY INSTRUCTIONS • Carefully read the operating instructions before first use of the appliance and keep them in a safe place: Tefal shall not be held responsible for incorrect use. • Only connect the appliance to an earthed socket. Check that the power supply voltage shown on the appliance’s rating plate corresponds to that of your installation • Take care not to place the appliance on a hot surface like a hot-plate or use it close to a naked flame. • Immediately take the plug out from the mains if the appliance does not function correctly. • Do not pull the power supply cable to remove the plug. • Do not let the power supply cord hang down on the edge of a table or a work surface. • Do not place your hand or the power supply cord on the hot parts of the appliance. • Never soak the appliance, the cord or electrical plug in water or other liquid...