Iniciar sesión:
Votos - 2, Puntuación media: 4.5 ( )

Manual de usuario Electrolux, modelo ICON E30WD75GSS

Fabricar: Electrolux
Tamaño del archivo: 3.78 mb
Nombre del archivo: 06828d73-eec6-40d7-aec4-ce6a8a3bf1e9.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Flexible Temperature Control The 450-watt heating element keeps food warm at a preferred serving temperature of anywhere from 80 to 210 degrees F. The blue LED panel is visible through the convenient display window located on the drawer front. Stainless Steel Interior Design Entire inner drawer cavity is constructed of smooth and durable, seamless stainless steel for easy cleanup. 30" WARMER DRAWER Capacity FEATURES Electronic Controls Blue LED Display Automatic Shutoff – 4 Hour Humidity Control Heating Element (Watts) Smooth-Glide™ Full-Extension Drawer Stainless Steel Drawer Interior Second-Tier Rack ACCESSORIES ServeWare – 5304447729 SPECIFICATIONS Drawer Interior Dimensions – Height Width Depth Overall Exterior Dimensions – Height Width Depth (to Front Drawer Corner) (Fully Extended Including Handle) Temperature Range Power Supply Connection Location Voltage Rating Connected Load (kW Rating) @120 Volts‡ Amps@120 Volts Minimum Circuit Required (Amps) 60" Electrical Cable Approved for Under-Counter Installation Product Weight Shipping Weight (Approx.) ‡For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation. NOTE: Always consult local and/or national electric codes. Refer to Product Installation Guide for detailed installation instructions on the web at electroluxicon.com. Specifications subject to change. 1.6 Cu. Ft. Yes Yes Yes Yes 450 Yes Yes Yes Optional 6-1/2" 20-15/16" 19-1/4" 11-1/4" 30" 23-3/8" 44-1/8 80°F – 210°F Right Center Rear 120V /60Hz /15A 0.45 3.75 15 Included Yes 49 Lbs. 60 Lbs. Humidity Control Allows adjustment of humidity levels to ensure that foods taste as they should even after reheating. electroluxicon.com Warmer Drawer E30WD75GSS designer series Overall depth with drawer fully extended (including handle) – 44 1/8" Full plywood base required to support 100 lbs. 4 1/2" min. required distance to floor 9 7/8" min. 10 1/4"max. 28 1/2" min. 28 3/4" max. 23 5/8"min. 24"max. Warmer Drawer Stand-Alone Installation 11 1/4" 23 3/8" 30" 25 1/4" 7/8" Power cord location (right center rear) 30" Warmer Drawer Specifications • Product Weight – 49 Lbs. • Warmer Drawer can be used alone, or is approved to be used in • Voltage Rating –120V/450W/60 Hz/15 Amps combination with any Electrolux ICON™ Wall Oven. (Refer to Combination Installation Specifications and drawing on this page.) • Connected Load (kW Rating) @120 Volts = 0.45kW (For use on adequately wired 120V, dedicated circuit having 2-wire service with a • Warmer Drawer can be used alone, or is approved to be used in separate ground wire. Appliance must be grounded for safe operation.) combination with any Electrolux ICON™ built-in product. (Refer to Combination Installation Specifications pages on web.) • Amps @120V = 3.75 Amps • Full plywood base required, capable of supporting 100 Lbs. Optional Accessories • Base must be level and cabinet front must be square. • ServeWare – (5304447729). Warmer Drawer/Wall Oven Combination Specifications • To support Wall Oven when using in combination with Warmer Drawer, two 3"-wide x 3/4" thick planks must be installed as a base, capable of supporting 200 Lbs. Do NOT use full base, since planks are necessary to allow for proper air displacement. Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxicon.com for detailed instructions. 9 7/8" min. 10 1/4"max. 11/2" min. *Critical dimension – MUST be applied **Electrical junction box for Wall Oven must be lower than the Warmer Drawer cutout † Maximum height depends on critical dimension (11 5/8") 3" max.** 30"min. 4" x 4" opening to route armoured cable 28 1/2" min. 28 7/8" max. Electrical junction box location 28 1/2"min. 28 3/4"max. Bottom of oven cutout 11 5/8" min.* 24"* (critical dimension) Two 3" wide x 3/4" thick planks must be installed, capable of supporting 200 lbs. 13/4" min.† Warmer Drawer/Single Wall Oven Combination Installation High standards of quality at Electrolux Home Products, Inc. mean we are USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxicon.com constantly working to improve our products. We reserve the right to change CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxicon.ca specifications or discontinue models without notice. E30WD75GSS 05/08 © 2008 Electrolux Home Products, Inc. Printed in the U.S.A. High-Speed Oven/Electric Single Wall Oven/ Warmer Drawer Combination Installation For detailed product dimensions and installation specifications, refer to model-specific product page and installation guide on web 24"min. 3"max.†† 30"min. 97/8"min. 101/4"max. 13/4"min.† 22 3/8" min. 22 7/8" max. E30EW75GPS E30EW75GSS Electric Single Wall Oven Cutout Full plywood base required to support 150 lbs. Full plywood base required to support 100 lbs. 281/2"min. 287/8"max. 28 1/2"min. 28 3/4"max. E30SO75FPS E30SO75ESS High-Speed...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría