Manual de usuario Kambrook, modelo KETTLE KSK65
Fabricar: Kambrook Tamaño del archivo: 1.21 mb Nombre del archivo: KSK65.pdf
Idioma del manual:
|
|
|
|
Enlace gratuito para este manual disponible en la parte inferior de la página
Resumen del manual
Multi-directional cordfree kettle 2. Convenient one touch pop-up lid with easy pour spout 3. 2200 watt easy clean concealed element 4. 1.7L capacity 5. On indicator light remains on during boiling cycle 6. Water window allows you to monitor water levels at all times KSK65_IB_FA.indd 6 18/11/09 9:35 AM 7 Operating Instructions Before First Use Remove any packaging materiel and promotional labels before using your kettle for the first time. It is recommended that before first use to fill to the kettle to the maximum level with cold tap water, bring to the boil and discard the water. Your kettle will only operate when positioned on the power base with the ON/OFF switch in the “ON” position. The kettle will automatically switch “OFF” once the water is boiled. Operation of Your Kettle 1. To fill the kettle, remove it from the power base and open the lid by pulling up. (see Fig. 1) Fill with the desired amount of water. Never fill the kettle above the ‘MAX’ mark, which is indicated on the water window. Too little water will result in the kettle switching “OFF” before the water has boiled. NOTE: Never operate the kettle dry – too little water will results in the kettle switching “OFF”. NOTE: Do not fill above the MAX mark on the water window as boiling water may splash out from the kettle. 2. Ensure that the lid is closed and locked firmly into place before placing the kettle on the power base. 3. Place the kettle firmly onto the power base. Plug the power cord into 230V or 240V power outlet and switch ‘On’. NOTE: This kettle must only be used with the power base supplied. Use caution when pouring water from your kettle as boiling water will scald. Do not pour the water too quickly. 4. Press the On/Off switch to the ‘ON’ position. The power ‘ON’ light will illuminate. 5. The Kettle will automatically switch ‘OFF’ once the water has boiled. Lift the kettle from the power base and pour the water. Take care to hold the kettle level, especially when filled to the maximum level. To re-boil it may be necessary to wait for a few seconds to allow the control to reset. NOTE: Do not remove the kettle from the power base during operation. Ensure the kettle has switched to “OFF” position after the water has boiled before removing the kettle from power base. Lift the kettle from the power base and pour the water. WARNING: This appliance is designed for the boiling of water only, never use it to heat or boil any other liquids or foodstuff. The lid should always be firmly in place when using. KSK65_IB_FA.indd 7 18/11/09 9:35 AM NOTE: Never operate the kettle dry – too little water will results in the kettle switching “OFF”. NOTE: Do not fill above the MAX mark on the water window as boiling water may splash out from the kettle. 2. Ensure that the lid is closed and locked firmly into place before placing the kettle on the power base. 3. Place the kettle firmly onto the power base. Plug the power cord into 230V or 240V power outlet and switch ‘On’. NOTE: This kettle must only be used with the power base supplied. Use caution when pouring water from your kettle as boiling water will scald. Do not pour the water too quickly. 4. Press the On/Off switch to the ‘ON’ position. The power ‘ON’ light will illuminate. 5. The Kettle will automatically switch ‘OFF’ once the water has boiled. Lift the kettle from the power base and pour the water. Take care to hold the kettle level, especially when filled to the maximum level. To re-boil it may be necessary to wait for a few seconds to allow the control to reset. NOTE: Do not remove the kettle from the power base during operation. Ensure the kettle has switched to “OFF” position after the water has boiled before removing the kettle from power base. Lift the kettle from the power base and pour the water. WARNING: This appliance is designed for the boiling of water only, never use it to heat or boil any other liquids or foodstuff. The lid should always be firmly in place when using. KSK65_IB_FA.indd 7 18/11/09 9:35 AM 8 WARNING: Do not release the lid while the water is boiling. Ensure the lid is closed whilst boiling. Safety Boil Dry Protection This kettle is fitted with a safety device, which protects against overheating should your appliance be operated with insufficient water. If this occurs the kettle will stop heating and automatically switch “OFF”. Should this occur, switch off at the power outlet and unplug. Allow the kettle to cool down before refilling. The safety device will automatically reset when the kettle has cooled down. For additional safety your kettle is fitted with an additional thermal cut out. In the event of overheating, the kettle will automatically shut down to prevent further damage. Should this occur, take your kettle to an authorized Kambrook Service Centre. Operating Instructions continued KSK65_IB_FA.indd 8 18/11/09 9:35 AM WARNING: Do not release the lid while the water is boiling. Ensure the lid is closed whilst boiling. Safety Boil Dry Protection This kettle is ...