Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
Place the heating base on a flat, dry surface. Insert the melting pot into the recess of the heating base. Pre-heat the appliance for 10 minutes by inserting the power plug into power outlet, switching on at the power outlet and turning the selector control to Setting 2 for 10 minutes. (The Power Indicator Light will illuminate on Settings 1 and 2). Place the chocolate to be melted into the preheated melting pot and stir regularly during the melting process. Melting time will vary with the amount and type of chocolate being used.As an indication,it will take approximately 10-15 minutes to melt 250 grams of chocolate. Once the chocolate is melted, turn the selector control to the off “O” position. Use the handle to remove the melting pot from heating base and pour the melted chocolate from either pouring lip, as precisely as possible, into clean and dry plastic moulds. Using the Small Plastic Moulds: Ensure the moulds are clean and dry. Spread the melted chocolate in the moulds with the spatula and pour any excess chocolate from the moulds back into the melting pot for re-use. Allow the chocolate filled moulds to dry and then cool in the refrigerator for several hours or until the chocolate is solid.When firmly set,turn the mould upside down and gently press the chocolate shapes out of the moulds onto a clean dry plate or serving tray. Store the solid chocolate shapes in a clean, dry, air-tight container and avoid over-handling as this may smudge or soften the shapes. Using the Large Heart Plastic Mould: Ensure the mould is clean and dry. Pour approximately 150g melted chocolate into the mould; the entire mould should be thickly coated with chocolate. Use the spatula or a pastry brush to evenly spread and smooth the chocolate around the mould.Allow to dry,then cool for several hours until the chocolate shape is firmly set. Cool in the refrigerator if desired. Once set, turn mould upside down, and gently press the chocolate heart out of the mould onto a clean,dry surface.The heart shaped mould can be used as an edible dish for desserts or as decoration on cakes. See recipe section page 7 for suggested uses. NOTE! The Chocolate Factory is designed solely for melting chocolate. NOTE! Chocolate should only be melted in the melting pot. Do not melt chocolate directly in the recess of the heating base. TIPS FOR THE BEST USE OF YOUR KAMBROOK CHOCOLATE FACTORY Do Ensure that the melting pot and accessories have been thoroughly washed in warm soapy water with soft cloth. Rinsed and dried thoroughly before assembly and use. Ensure the Chocolate Factory is correctly assembled before operating. Follow assembly and operation instructions on page 4. Ensure the Chocolate Factory is used on a clean, dry and level surface. Use Setting 1 for keeping chocolate warm. Use Setting 2 for melting chocolate. Use the spatula provided to stir the chocolate regularly in the melting pot during melting. Ensure that melting pot and moulds are dry and clean. Never add water to the chocolate or have wet moulds or a wet melting pot as this will harden the chocolate and it will not melt. Use the accessories provided to help you create decorative chocolates. Store the solid chocolate shapes in a clean, dry, air-tight container and avoid over-handling as this may smudge or soften the shapes. 5 Don’t Do not melt chocolate directly in the recess of the heating base. Only melt chocolate in the melting pot provided. Do not immerse the heating base, cord or power plug in water or any other liquid. Do not use harsh abrasives or cleaners on the heating base and accessories. Do not place the melting pot or accessories in the dishwasher. NOTE! Once the chocolate is melted, and should you require it to keep warm, turn the switch to setting "1” to reduce the possibility of burning the chocolate. Disassembling/ Cleaning your Kambrook Chocolate Factory Ensure that the Chocolate Factory is switched off by turning the selector control to the off “O” position, the power switched off at the power outlet and the power plug is unplugged from the power outlet. Remove the melting pot from the heating base recess by lifting it in a direct, upward motion. Cleaning the Melting Pot and Accessories Wash the melting pot and accessories in warm, soapy water. Rinse and dry thoroughly. Cleaning the Heating Base The heating base can be cleaned with a soft, damp cloth (do not use abrasive agents or cloths which can damage the surface). Dry and polish with a soft, lint- free cloth. NOTE! Do not use harsh abrasives or cleaners on the heating base, melting pot or accessories NOTE! Do not place the heating base, melting pot or accessories in the dishwasher. NOTE! Do not immerse the heating base, cord or power plug in water or any other liquid. Storage Before storing, thoroughly wash and dry melting pot and accessories. Ensure that the heating base is clean and dry. Assemble the Chocolate Factory and store on the kitchen bench or in an easy to access cupboard. Store out of reach o...