Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
REViSED JUNE 2009 (CR). WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE or form without the written approval of grizzly INDUSTRIAL, INC. #pC6395 PRiNTED In China PARTS INvENTORY The Model H3035 was carefully packed when it left our warehouse. if you discover this cart is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult. When you are completely satisfied with the condition of your shipment, you should inventory the contents. Inventory (Figure 1) A. Axle Bracket ..............................................1 B. Bottom Tray................................................1 C. Top Tray......................................................1 D. Posts...........................................................4 E. Axle Brace (R)............................................1 F. Axle Brace (l).............................................1 G. Swivel Casters............................................2 H. Wheels.......................................................2 I. Handle........................................................1 J. Bolt Bag (not shown)..................................1 —Hex Bolts M8-1.25 x 25..........................4 —Hex Nut M8-1.25...................................14 —Hex Bolts M8-1.25 x 20..........................6 —Flat Washers 8mm...............................14 —Lock Washers 8mm..............................14 —Hex Bolts M8-1.25 x 40..........................4 —Hex Bolts M10-1.5 x 40...........................8 —Hex Bolts M10-1.5 x 25...........................2 —Flat Washers 10mm..............................10 —Hex Nuts M10-1.5...................................8 —Lock Washers 10mm............................10 —Acorn Nuts M12-1.75...............................2 —Flat Washers 12mm....................................2 Figure 1. Main contents. Awarning Children may climb into plastic bags and suffocate. Keep all plastic bags included in packaging out of the reach of children. ACAUTION Adult supervision is always required while this wagon is being used by children. ASSEMBLY INSTRUCTIONS 1. Attach the swivel casters to the plates on the bottom tray with the M8-1.25 x 25 bolts, washers, lock washers and nuts. NOTE: Only tighten the bolts finger tight until assembly is complete. 2. Attach the axle bracket to the rear cross member with the M8-1.25 x 20 bolts, washers, lock washers and nuts. 3. Slide the right and left axle braces over the axle and attach to the adjacent cross-member with the M8-1.25 x 20 bolts, washers, lock washers, and nuts. 4. Slide the wheels on the axle so the valves are facing out. Slide on one 12mm washer and thread an M12-1.75 on the axle to secure the wheel. 5. Turn cart on side and attach the four posts with M8-1.25 x 40 bolts, washers, lock washers and nuts through the bottom of the tray. 6. Set the cart upright and attach the top tray with M8-1.25 x 25 bolts, washers, lock washers an nuts. 7. Slide the handle into the guides on the lower tray and attach the M8-1.25 x 25 bolt, washer and lock washer into the handle through the bottom. 8. Once all parts are assembled and aligned, tighten all of the bolts. If you need additional help with this procedure, call our service department at: (570) 546-9663. REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH3035001 AXLE BRACKET 12 PLW04M LOCK WASHER 8MM 2 PH3035002 BOTTOM TRAY 13 PN03M HEX NUT M8-1.25 3 PH3035003 TOP TRAY 14 PB09M HEX BOLT M8 X 1.25 X 20 4 PH3035004 POST 15 PB126M HEX BOLT M8 X 1.25 X 38 5 PH3035005 AXLE BRACE (R) 16 PB31M HEX BOLT M10 X 1.5 X 40 6 PH3035006 AXLE BRACE (L) 17 PW04M FLAT WASHER 10MM 7 PH3035007 HANDLE 18 PLW06M LOCK WASHER 10MM 8 PH3035008 FIXED WHEEL 13.0 X 5 19 PN02M HEX NUT M10-1.5 9 PH3035009 SWIVEL CASTER 4.1 X 3.5 20 PB32M HEX BOLT M10-1.5 X 25 10 PB07M HEX BOLT M8-1.25 X 25 21 PN26M ACORN NUT M12-1.75 11 PW01M FLAT WASHER 8MM 22 PW06M FLAT WASHER 12MM...