Votos - 5, Puntuación media: 4.6
(
)
)
|
Resumen del manual
Assemble, test, and use only in accordance with the Owner’s Manual instructions. READ and FOLLOW chemical label instructions. Pesticides are hazardous chemicals. KNOW emergency procedures BEFORE handling chemicals. Sprayer leaks, bodily chemical contact, poisoning, and spills require immediate response. AVOID inhaling, ingesting, or coming into contact with any chemicals. WEAR personal protective gear when filling, using, cleaning, and servicing the sprayer. KEEP sprayer and spray materials away from children and pets. Pesticides are especially toxic to them. EXERCISE CAUTION in ATV vehicle handling and do not exceed 5 MPH. ATV will be less stable and handle very differently with filled sprayer attached. DO NOT TURN ON POWER to sprayer until ready to spray in order to avoid unintentional spray release. Improper use of the sprayer or handling of chemicals could result in serious injury or illness to the operator or nearby persons/animals, or could cause damage to the environment. ** This sprayer is recommended for use in spraying non-flammable liquids such as pesticides, water for plants/trees or dust control, ice control chemicals, or water-based non-flammable sealants or stains for outdoor wood surfaces. However, WE RECOMMEND THAT THE SPRAYER NOT BE USED FOR OTHER PURPOSES ONCE IT HAS BEEN USED FOR SPRAYING PESTICIDES. Any chemical will leave some residual in the tank liner or sprayer components, even after the sprayer has been properly cleaned. These residual chemicals can have unexpected effects on future uses. For example, spraying water or other liquids that are contaminated with residual pesticide may result in unforeseen hazards to plant or animal life. Any Questions, Comments, Problems, or Parts Orders Call NorthStar Product Support 1-800-270-0810 Hazard Signal Word Definitions 2 Table of Contents Intended Use ................................................................................................................................. 4 Summary of Important Safety Information................................................................................5 During Assembly During Operation • General Chemical Safety • Chemical Application Safety • ATV Vehicle Handling Safety • Chemical Accident Procedures Warning Label Locations..............................................................................................................7 Component Inventory Unpacking.....................................................................................................................................8 Assembly Step One: Attach gauge..................................................................................................................9 Step Two: Attach gun hose to spray gun and pump ..........................................................................9 Step Three: Attach gun clips to tank................................................................................................9 Step Four: Attach drain cap to tank .................................................................................................9 Step Five: Attach hose guide to tank .............................................................................................10 Step Six: Attach sprayer to vehicle................................................................................................10 Step Seven: Connect power cords to vehicle battery.......................................................................11 Step Eight: Check and test completed assembly ...................................................................................14 Machine Components ..................................................................................................................15 Operation Important Safety Information - Operation.................................................................................16 • General Chemical Safety • ATV Vehicle Handling Safety • Chemical Applicator Safety • Chemical Accident Procedures Preparing the Sprayer for Each Use........................................................................................20 Using the Sprayer Step One: Assess wind conditions and clear work area .....................................................................21 Step Two: Fill the sprayer ...........................................................................................................22 Step Three: Operate the sprayer....................................................................................................24 Step Four: Clean sprayer and decontaminate after use.......................................................................27 Storage ..........................................................................................................................................28 Preparing for storage Removing from storage Troubleshooting ...........................................................................................................................29...