Votos - 3, Puntuación media: 4 ( )

Fabricar: Kompernass Tamaño del archivo: 175.04 kb Nombre del archivo: Idioma del manual:

• Do not pull on the power cable of the illuminated figure and ensure that the power cable is laid so that no one can walk on or stumble over it. Ensure that the figure has a safe and stable positioning. To avoid damage to the illuminated figure, please store it in its original packaging after use. • Always take hold of the power cable by the plug. Do not pull on the cable itself, and NEVER take hold of the power cable, the plug or the rope light itself with wet hands, as this could cause a short circuit or an electric shock. Do not place furniture or similar items on the power cable and ensure that it cannot become trapped. NEVER tie knots in the power cable and do not bind it with other cables. Place the power cable in a position where it cannot be trod on. A damaged power cable can cause a fire or electrical shock. Check the power cable from time to time. Risk of fire! • Do not use the appliance adjacent to hot surfaces. • Do not place any open sources of fire, such as candles, close to the illuminated figure. • When a storm and/or thunderstorm with the risk of lightening threatens, please disconnect the illuminated figure from mains power. • NEVER allow the figure to light up in its packaging, there is a risk of it overheating! • You may only place the illuminated figure on normal fire-retardant surfaces. • Notice regarding power disconnection: To completely disconnect the device from mains power, the plug MUST be removed from the power socket. For this reason the device should be placed in a position where unobstructed access to the power socket is assured at all times, so that in an emergency you will be able to immediately remove the plug. To eliminate the risk of fire, you should disconnect the plug from the power socket if you do not intend to use the device for an extended period, for example, during a holiday. Risk of accidents! • Do not hang or affix any objects to the illuminated figure. • Ensure that the power cable to the illuminated figure does not pass through areas where lawnmowers, trimmers, shears or similar cutting instruments might be used. - 2 Setting up the illuminated Figure • Take the Illuminated Figure from its packaging. • Remove all transportation fasteners and tapes/foils. • Place the Illuminated Figure on a suitable surface. • Carefully pull the two wire elements apart, on the Christmas tree figure (KH4222) and the Snowman figure (KH4220), so that the figures can stand alone. • If necessary, secure the illuminated figures to the ground with the supplied ground spikes. • Connect the Illuminated Figure with a correctly installed 230 V domestic power wall socket. • When you wish to turn off the illumination function of the Illuminated Figure, remove the plug from the wall socket. • During the periods in which the Illuminated Figure will not be in use, please store it in its packaging. Cleaning and Care Risk of potentially fatal electrical shock: • First remove the plug from the power socket. • NEVER submerse the Illumi...

Descargar ahora

Introduzca dos números de la imagen: