Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Note: This is a professional grade product. A knowledge of construction techniques, plumbing and electrical installation according to codes are required for proper installation and user satisfaction. We recommend that a licensed contractor perform the installation of all Jacuzzi Whirlpool Bath products. Our warranty does not cover improper installation related problems. CONTENTS 2 WALL Specifications _________________________________________________________________________ 2 Rough-in Reference ____________________________________________________________________ 3 Component Identification ________________________________________________________________ 4 Base Installation _______________________________________________________________________ 5-7 Tower and Glass Panels Installation ________________________________________________________ 8-12 3 WALL Specifications _________________________________________________________________________ 13 Rough-in Reference ____________________________________________________________________ 14 Component Identification ________________________________________________________________ 15 Base Installation _______________________________________________________________________ 16-18 Tower and Glass Panels Installation ________________________________________________________ 19-22 2 & 3 WALL Operation ___________________________________________________________________________ 23 Maintenance __________________________________________________________________________ 24 Tower Fixture Repair Parts _______________________________________________________________ 25 Tower Plumbing Repair Parts _____________________________________________________________ 26 2 Wall Unit Repair Parts _________________________________________________________________ 27 3 Wall Unit Repair Parts _________________________________________________________________ 28 Warranty _____________________________________________________________________________ 29-30 Save These Instructions for Future Use. Owner's Record Date Purchased ____________________________________________________________ Purchased From ____________________________________________________________ Installed By ________________________________________________________________ Serial Number _____________________________________________________________ Model ____________________________________________________________________ 1 2 WALL SPECIFICATIONS Important: Read complete instructions before beginning installation. Each unit arrives ready for installation, equipped with base, glass and associated hardware. Remove the unit from the carton. Retain the shipping carton until satisfactory inspection of the product has been made. Immediately upon receipt, inspect the base and other components before installing. Check all carton inserts for parts and hardware. Should inspection reveal any damage or defect in any component, do not install the unit. Damage or defect to any component claimed after the unit is installed is excluded from the warranty. Jacuzzi Whirlpool Bath's responsibility for shipping damage ceases upon delivery of the products in good order to the carrier. Refer any claims for damage to the carrier. For definitions of warranty coverage and limitations, refer to the published warranty information packed with the product. Jacuzzi Whirlpool Bath is not responsible for any defect that could have been discovered, repaired, or avoided by following this inspection. BASE SPECIFICATIONS DIMENSIONS 60" (1219 mm) L 42-5/16" ( 1075 mm) W 4" ( 102 mm) H PRODUCT WEIGHT (Base + Enclosure ) 196 lb (89 kg) W TOTAL WEIGHT/ FLOOR LOADING 396 lb (180 kg)/ 23 lb/sq. ft. (112 kg/sq. m) NOTE: MINIMUM WATER PRESSURE FOR THE SYSTEM IS 40 PSI. L TOP VIEW 1/2" RIGID COPPER PIPE UNDER BASE 1-1/2" TILE FLANGE FRONT VIEW 1-1/2" TILE FLANGE H 45° ELBOW 2 PROVIDED (LOOSE) 2 2 WALL ROUGH-IN REFERENCE 84" FRONT VIEW 60" 42-5/16" 33-3/4" 27-15/16" 23" 21-1/2" 1/2" RIGID COPPER PIPE UNDER BASE COLD SUPPLY 1-1/2" TILE FLANGE HOT SUPPLY MINIMUM WATER PRESSURE FOR THE SYSTEM IS 40PSI TOP VIEW 3 2 WALL COMPONENT IDENTIFICATION HEX WRENCH (1) (PROVIDED) BOTTOM BRACKET CORNER POST TOWER WITH PLUMBING, FIXTURES, MAGNETIC GASKET, BOTTOM PLATE AND TOP COVER TOWER MOUNTING BOLT & WASHER SELF STRAIGHT GLASS WALL MOUNTING POST STRAIGHT GLASS PANEL MOUNTING POST CAP (2) 3 SCREWS AND 3 WALL ANCHORS PER MOUNTING POST WALL MOUNTING POST (PREASSEMBLED) GLAZING GASKET (3) CURVED GLASS FRONT RAIL GLASS PANEL SUPPORT RAILBRACKET COVER (2) WALL MOUNT BRACKET (2) TOWER SUPPORT RAIL TAPE (6 PIECES) TOWER COVER GLAZING GASKET GLAZING GASKET CURVED GLASS BASE DRILLING SCREW 4 2 WALL BASE INSTALLATION PRELIMINARY ROUGH-IN The floor structure beneath the unit must be able to support a total weight of the unit and bather. Refer to the table under total weight. STEP 1 Provide an opening in the subfloor no less than 5" x 5" square. This opening should be located on the center lines of the shower base drai...