Votos - 3, Puntuación media: 4 ( )

Fabricar: AeroGarden Tamaño del archivo: 924.55 kb Nombre del archivo: 14824f61-4ff5-426f-adc8-593dbb40d261.pdf Idioma del manual:

Lights Button Blinking Light (if you selected Salad Greens) If light from your AeroGarden is visible from your bedroom, you may want to set the lights to go off about the time you usually go to bed, so as not to disturb your sleep. do the following to set the time you want your lights to go off: Basic Reminders About Your AeroGarden Basic Reminders About Your AeroGarden AeroGarden Classic control Panel Features • Water Level Low When light blinks add water up to “Fill to Here.” • Add Nutrients (Feed Garden - Basic Feeding) When “Add Nutrient” and “Water Level Low” lights start blinking (every 2 weeks), add 2 nutrient tablets* and fill the Bowl with water up to “Fill to Here.” Press and release the “Reset” button to restart nutrient timer and turn off blinking lights. *See Tending & Harvesting Guide for plant-specific nutrient information. • Lights On/Off Use to occasionally override built-in light timer. Once pushed, lights will stay off/on until the next time built-in light timer is set to go on/off. This will not affect the timing of your light cycle and occasional use of this feature will not harm your plants. remember: Grow Bulbs should be replaced every 6 months – order replacement bulbs at or from your retailer. • Remove Bio-domes When plants appear through the hole in Seed Pod Labels, remove Bio-Domes and discard or recycle. noTe: never remove Seed Pod Labels. Basic Reminders About Your AeroGarden (continued) Raise lamp Hood (lights) As plants grow to 1-2” from lights, raise Lamp Arm one Locking Button at a time. Be sure Lamp Arm is set on the lowest Locking Button when you start your AeroGarden. Unplug AeroGarden. 1Remove Bowl from Base.2Raise Lamp Arm/Lamp Hood by holding Lamp Arm & Hood with one hand, and pushing in Locking Button with the other. 3Replace Bowl on Base.4Plug in AeroGarden. 5It is important to keep track of how long your Grow Bulbs have been in use and replace them every 6 months. After 6 months of use, the quality of light from the Grow Bulbs in your AeroGarden begins to degrade. This happens with all full-spectrum fluorescent bulbs, and is a critical issue when growing plants. In order for plants to be healthy and productive, they must receive the appropriate intensity and spectrum of light. How To Replace Grow Bulbs… • Unplug AeroGarden. • Remove old Grow Bulbs and carefully discard*. IMPorTAnT: To avoid burning, be sure Grow Bulbs are cool before handling. • Insert new Grow Bulbs into Lamp Hood. • Plug in AeroGarden. *Check with local recycling authorities for light bulb recycling availability in your area. Replace Grow Bulbs order replacement bulbs at or from your retailer. Push locking Button in Prepare For Your Next Garden Prepare For Your Next Garden Use only water and mild soap when cleaning your AeroGarden (except when Sanitizing -Step 7). Do not use abrasive cleaners or run through the dishwasher. ! Sanitize AeroGarden. • Fill Bowl . full with water. • Add . c...

Descargar ahora

Introduzca dos números de la imagen: