Votos - 5, Puntuación media: 3.4
(
)
)
|
Resumen del manual
1.To reduce the risk of electric shock, the Space•Saver 6 has a specific plug. Do not change the plug in any way. DANGER – to reduce risk of electric shock: 2. Always unplug Space•Saver 6 from electrical outlet before cleaning or changing Grow Bulbs (light bulbs). WARNING – to reduce risk of burns, fire, electric shock, or injury to persons: 3. Unplug Space•Saver 6 from outlet before putting on or taking off parts. 4. Close supervision is necessary when Space•Saver 6 is used by or near children, invalids, or disabled persons. 5. Use Space•Saver 6 only for its intended use as described in the instructions. Do not use attachments not recommended by manufacturer. 6. Never operate Space•Saver 6 if it has a damaged cord or plug, if it is not working properly, if it has been dropped and damaged, or if it has been dropped in water. If any of these conditions occur/exist, contact or your country’s local distributor for instructions. 7. Keep cord away from heated surfaces. 8. Never operate furnishing with air openings blocked. Keep air openings free of lint, hair, and the like. 9. Never drop or insert any object into any electrical openings. 10. Do not use outdoors. 11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 12. Do not touch moving parts or hot parts such as pumps, bulbs, reflective surfaces, and the like. 13.To disconnect, remove plug from outlet. 14. Do not place or submerse base, cord, plug, or lamp hood in water or other liquid to clean it. 15. Do not allow water to contact hot light bulbs. 16. Use only approved and supplied parts and accessories. Use only lamp model 100340 (N. America) or 200340 (Europe & Australia) Grow Bulbs with this Space•Saver 6 model. Use of any other kind of accessory is not recommended. Replacement parts can be ordered from or from your retailer. 17. Do not use Space•Saver 6 for other than intended purpose. 18.This product is intended for household and residential use only.This product is not approved for commercial applications. 19. Read and follow all important notices on the Space•Saver 6 and in the accompanying literature. 20. If supply cord is damaged, it must be replaced by manufacturer, its service agent, or similarly qualified technician in order to avoid a hazard. 21. Electrical wiring must be in accordance with local regulations. 22.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance by a person responsible for their safety. 23. Children should be supervised to ensure they do not playwith the appliance. SAvE THESE INSTRUCTIONS 1 Quick Start Assembly(No tools required) 1 Quick Start Assembly(No tools required) Lamp Hood (front view) Lamp Hood (bottom view) PushLamp Arm downuntil youhear a“click.” Insert Lamp Arm into Base BUnpack Your Space•Saver 6A BowlInsert Deluxe B Grow Bulbsinto Lamp Hood C Plug Lamp Cord into Lamp Hood D Push straight in. DO NOT TWIST BULBS! Deluxe B Grow Bulbs (2) Seed Kit Base (front view) Lamp Arm (back view) Lamp Arm (back view) Base (back view) Push Lamp Cord firmly into socket inLamp Hood. LampCordremember to replace Grow Bulbs every 6 months. Instructions continued on next Page 2 1 Quick Start Assembly(continued) 1 Quick Start Assembly(continued) Set Bowl into BaseF Be sure that Bowl is securely seated on Air coupling in Base. (front view) Place Lamp Hood on Lamp Arm E (back view) Centerhandsover Lamp Arm andpush Lamp Hood downuntil you hear a “click.” Air Coupling G Moving Your Space•Saver 6 Use one hand tograsp Lamp Arm. nEED ADDITIonAl HElP? For supplies and information, visit… Gently slide your Space•Saver 6 toward the surface edge and place other hand under Base. note: Do not place beneath under-cabinet lights. Near: A standardelectrical outlet, perlocal regulationsUnder: A space thatallows 22” (56cm) clearance for the fullheight of raised lampOn: A sturdy, water- tolerant surface(Metal surfaces may cause noise due to vibration) In: A 60-75°F(16-24°C) environment(optimal) Away FromReach of children and petsDirect sources of heat (e.g., stove, furnace vents) Direct sources of cold air (e.g.,window drafts,A/C vents) For Optimal Tending & Harvesting, Also ConsiderEasy access to un-softened waterPlace Your Garden H 68°F/20°Cnote: Do not place beneath under-cabinet lights. Near: A standardelectrical outlet, perlocal regulationsUnder: A space thatallows 22” (56cm) clearance for the fullheight of raised lampOn: A sturdy, water- tolerant surface(Metal surfaces may cause noise due to vibration) In: A 60-75°F(16-24°C) environment(optimal) Away FromReach of children and petsDirect sources of heat (e.g., stove, furnace vents) Direct sources of cold air (e.g.,window drafts,A/C vents) For Optimal Tending & Harvesting, Also Conside...
Otros modelos de este manual:Otros accesorios para la casa - AeroGarden 200340 (1.33 mb)