Votos - , Puntuación media:
(
)
)
Fabricar: InFocus
Tamaño del archivo: 1.18 mb
Nombre del archivo: 71ed2c06-ec1a-45ac-b30d-5feecf32ba6c.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
22. Have your tool repaired by a qualified person. This electric tool is in accordance with the relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts. Otherwise this may result in considerable danger to the user. PRECAUTIONS ON USING ROTARY HAMMER 1. Wear earplugs to protect your ears during operation. 2. Do not touch the bit during or immediately after operation. The bit becomes very hot during operation and could cause serious burns. 3. Before starting to break, chip or drill into a wall, floor or ceiling, thoroughly confirm that such items as electric cables or conduits are not buried inside. 4. Always hold the body handle and side handle of the power tool firmly. Otherwise the counterforce produced may result in inaccurate and even dangerous operation. English SPECIFICATIONS Voltage (by areas)* (110V, 230V) Power Input 720W* No-load speed 0 – 1050 min–1 Full-load impact rate 0 – 4600 min–1 Capacity: concrete steel wood 3.4 – 24 mm 13 mm 32 mm Weight (without cord and side handle) 2.8 kg Dust collecting adapter Max. hole-drilling depth: Diameter of drill: Max. length of drill (overall length): 100 mm (adjustment possible between 0 and 100 mm) 3.4 – 24 mm 270 mm Dustbag capacity: 0.4 liters *Be sure to check the nameplate on product as it is subject to change by areas. STANDARD ACCESSORIES (1) Case (Molded plastic) ................................................. 1 (2) Side handle ................................................................. 1 (3) Dust collecting adapter .............................................. 1 (4) Dust bag ...................................................................... 1 [Numbers (3) and (4) refer to use on concrete] (5) Cap .............................................................................. 1 Standard accessories are subject to change without notice. OPTIONAL ACCESSORIES (sold separately) 1. Drilling anchor holes (rotation + hammering) . Drill bit (Slender shaft) Drill bit (slender shaft) Outer diameter Effective length Overall length 3.4 mm 45 mm 90 mm3.5 mm Adapter for slender shaft (SDS-plus shank) Drill bit (Slender shaft) . Drill bit (Taper shank) and taper shank adapter Drill bit (Taper shank) Taper shank adapter (SDS-plus shank) Cotter Outer diameter 11.0 mm 12.3 mm 12.7 mm 14.3 mm 14.5 mm 17.5 mm 21.5 mm Taper mode Applicable drill bit Morse taper (No.1) Drill bit (taper shank) 11.0 ~ 17.5 mm Morse taper (No.2) Drill bit (taper shank) 21.5 mm A-taper Taper shank adapter formed A-taper or B-taper is provided as an optional accessory, but the drill bit for it is not provided.B-taper English . 13 mm rotary hammer chuck For drilling operations when using a straight shank bit for impact drilling with a rotary hammer. ( )Straight shank bitfor impact drill 13 mm rotary hammer chuck (SDS-plus shank) Chuck wrench 2. Anchor setting (rotation + hammering) . Anchor setting adapter (for rotary hammer) Anchor setting adapter (SDS-plus shank) (for rotary hammer) Overall length: 160, 260 mm Anchor size W1/4” W5/16” W3/8” . Anchor setting adapter (for manual hammer) Anchor size W1/4” W5/16” W3/8” W1/2” W5/8” 3. Crushing operation (rotation + hammering) Bull point (Round type only) (SDS-plus shank) Anchor setting adapter (for manual Hammer) English 4. Bolt placing operation with Chemical Anchor. (rotation + hammering) (SDS-plus shank) 12.7 mm Chemical Anchor Adapter 19 mm Chemical Anchor Adapter Standard socket on the market( ) 5. Drilling holes and driving screws (rotation only) . Drill chuck, chuck adapter (G), special screw and chuck wrench Chuck adapter (G) (SDS-plus shank) Drill chuck (13VLRB-D)Special screw Chuck wrench 6. Drilling holes (rotation only) Chuck adapter (D) (SDS Plus shank) Drill chuck (13VLD-D) Chuck wrench . 13 mm drill chuck ass’y (includes chuck wrench) and chuck (for drilling in steel or wood). 7. Driving Screws (rotation only) Chuck adapter (D) (SDS-plus shank) Bit No. Bit No. Screw Size Length No. 2 3 – 5 mm 25 mm No. 3 6 – 8 mm 25 mm English 8. Dust cup, Dust collector (B) Dust cup Dust collector (B) 9. Paper dust bag 10. Hammer grease A 500 g (in a can) 70 g (in a green tube) 30 g (in a green tube) Optional accessories are subject to change without notice. APPLICATIONS Rotation and hammering function . Drilling anchor holes . Drilling holes in concrete . Drilling holes in tile Rotation only function . Drilling in steel or wood (with optional accessories) . Tightening machine screws, wood screws (with optional accessories) PRIOR TO OPERATION 1. Power source Ensure that the power source to be utilized conforms to the power requirements specified on the product nameplate. 2. Power switch Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle while the power switch is in the ON position, the power tool will start operating immediately, which could cause a serious accident. 3. Extension cord When the work area is removed from the power source, us...