Votos - 5, Puntuación media: 4.2
(
)
)
|
Resumen del manual
16008 North 81st Street Scottsdale, AZ 85260 Phone: 480-483-1214 Fax: 480-483-5620 May 2000 Notice This publication and its contents are proprietary to Universal Laser Systems, Inc. (ULS), and are intended solely for the contractual use of ULS, Inc. customers. While reasonable efforts have been made to assure the accuracy of this manual, ULS shall not be liable for errors contained herein or for incidental or consequential damage in connection with the furnishing, performance, or use of this material. ULS reserves the right to revise this manual and make changes from time to time without obligation by ULS to notify any person of such revision or changes. ULS does not assume any liability arising out of the application or use of any products, circuits, or software described herein. Neither does it convey a license under its patent rights nor the patent rights of others. This publication and its contents may not be reproduced, copied, transmitted, or distributed in any form, or by any means, radio, electronic, mechanical, photocopying, scanning, facsimile, or otherwise, or for any other purpose, without the prior written permission of ULS. ULS provides no warranties whatsoever on any software used in connection with any ULS Laser Platform, express or implied. Neither does it guarantee software compatibility with any off-the-shelf software package or any software program that has not been written by ULS. Intended use of this system must be followed within the guidelines of this manual. In no event will ULS be liable for any damages caused, in whole or in part, by customer, or for any economic loss, physical injury, lost revenue, lost profits, lost savings or other indirect, incidental, special or consequential damages incurred by any person, even if ULS has been advised of the possibility of such damages or claims. HP is a registered trademark of Hewlett-Packard Corporation. Windows is a registered trademark of Microsoft Corporation. Macintosh is a registered trademark of Apple Computer Corporation. PostScript, Photoshop, and Streamline are registered trademarks of Adobe Systems Inc. CorelDraw is a registered trademark of Corel Corporation. AutoCad is a registered trademark of Autodesk Inc. © Universal Laser Systems Inc., 2000 All Rights Reserved Ihr ULS Vertragshandler : MarkIDent GmbH Winterspurerstr. 19 78333 Stockach Introduction We would like to thank you for purchasing the M-300 Laser Platform. Years of testing and refinements have made this unit the ultimate laser engraving and cutting system. With it’s small footprint design and industry standard 24” x 12” work area, the M-300 Laser Platform is now equipped with our unique “Rapid Reconfiguration Capability a”. This gives the user the ability to exchange it’s “Quick Change Laser Cartridge a “ with a lower or higher powered unit in minutes and without the use of tools. This feature, and many others make this unit truly the most flexible, easiest to use, and the most user serviceable piece of equipment in it’s class. To begin with, we highly recommend that this entire manual be read before attempting to use the M-300 Laser Platform. The manual includes important information about safety, assembly, use, and maintenance. We cannot emphasize the importance of reading this ENTIRE manual. How To Get Help Step 1: Determine exactly what the problem is. Refer to “Section 8 – Troubleshooting” for a possible solution. Step 2: Try to recreate the problem and write down the circumstances in which the problem occurred. Be prepared to describe all pertinent information about the computer being used with the laser cutting and engraving system such as software, operating system and computer type. Have the serial number of the laser system available. The serial number tag is located on the back of the machine in the lower right corner. There is a second serial tag located behind the front door on the right side when you open it. Step 3: Contact your local Sales Representative first to assist you in diagnosing the problem. If possible, call from a phone that is close to the laser engraving system so that the system can be operated while talking to our representative. Step 4: If your local Sales Representative is unavailable, contact our Customer Service Department at: Universal Laser Systems, Inc. Technical Support/Parts Department 16008 North 81st Street Scottsdale, AZ 85260 Phone: 480-609-0297 Fax: 480-609-1203 Email: service@ulsinc.com M-F 7am – 5pm Arizona Time Ihr ULS Vertragshandler : MarkIDent GmbH Winterspurerstr. 19 78333 Stockach Table of Contents SECTION 1 - Safety Description of Appropriate Use ................................................................................. 1-1 General Safety ........................................................................................................ 1-1 Laser Safety............................................................................................................1-2 Safet...