Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
USE 18 ELEMENT MIXING NOZZLE #04627 600ml 1:1 Cartridge PART OEM APPROVED CLAMPING OR SANDING OR NUMBER PLIOGRIP® NO. OPEN TIME WORK TIME FIXTURE TIME PAINTING TIME 04677 7773 3 minutes 3-1/2 minutes 10 minutes 30 minutes 04678 7779 10 minutes 17 minutes 30 minutes 60 minutes 04679 7770 35 minutes 50 minutes 90 minutes 3 hours USE APPLICATOR GUN #41397-PNEUMATIC. USE 18 ELEMENT MIXING NOZZLE #04627 Times will increase as temperatures decrease. Times shown above are at 77f/25c. Full cure time is 24 hours but this may be accelerated with heat. Do not apply polyester based putty/fillers on urethane products. SMC/FRP Fiberglass Repair Fiberglass Matting Adhesive . A low viscosity two-part urethane used to saturate fiberglass cloth when preparing backup patches . The self-leveling feature allows the Matting Adhesive to be used for filling cracks and channels as well Fiberglass Mat . For reinforcing SMC, FRP and fiberglass repairs . Perfect for large repairs where extra reinforcement is needed Fiberglass and SMC Cloth . Excellent for any backup repair – large or small . Conforms to any shape 400ml 2:1 Cartridge PART CLAMPING OR SANDING OR NUMBER DESCRIPTION WORK TIME FIXTURE TIME PAINTING TIME 04674 Epoxy Panel Bonding Adhesive 90 minutes 4 hours 8 hours USE APPLICATOR GUN #41398-MANUAL OR #41396-PNEUMATIC. USE 24 ELEMENT MIXING NOZZLE #04628. GLASS BEADS FOR ADEQUATE SPACING. SMC/FRPFiberglassPanel Bonding Epoxy Adhesives Times will increase as temperatures decrease. Times shown above are at 77f/25c. Full cure time is 24 hours but this may be accelerated with heat. Rigid Parts Repair and Flexible PlasticParts Repair Quickly repair SMC, FRP, fiberglass and plastic parts. Designed for easy sanding and excellent feather edging, these products are a proven adhesive and filler for all rigid and flexible parts. Formulated to finish the front side of repairs used over the top of urethane adhesives. 400ml 1:1 Cartridge PART SANDING OR NUMBER DESCRIPTION WORK TIME PAINTING TIME 04675 Rigid Parts Epoxy Adhesive 6 mintues 12 minutes USE APPLICATOR GUN #41398-MANUAL OR #41396-PNEUMATIC. USE 24 ELEMENT MIXING NOZZLE #04628 400ml 1:1 Cartridge PART SANDING OR NUMBER DESCRIPTION WORK TIME PAINTING TIME 04676 Flexible Parts Epoxy Adhesive 6 mintues 12 minutes 04625 Adhesion Promoter for TPO Repair -- USE APPLICATOR GUN #41398 MANUAL OR #41396 PNEUMATIC. USE 24 ELEMENT MIXING NOZZLE #04628 #04675 #04676 Accessories © Saint-Gobain Abrasives, Inc. February 2007 PLIOGRIP® ADHESIVE Manufactured by Ashland Inc., Columbus, OH • ®PLIOGRIP is a registered trademark of, Ashland Inc. The Norton logo and SpeedGrip are registered trademarks ofSaint-Gobain Abrasives, Inc. FORM # 7890 If polyester putty/filler must be used, skim coat over the SpeedGrip repair area using SpeedGrip Rigid Repair Adhesive #04675 or SpeedGrip Flexible Repair Adhesive #04676. 400ml 1:1 Cartridge PART OEM APPROVED SANDING OR NUMBER DESCRIPTION PLIOGRIP® NO. SIZE OPEN TIME PAINTING TIME 04680 Fiberglass Matting Adhesive 7779-L 400ml 1:1 cartridge 10 minutes 45 minutes 04690 Fiberglass Mat -36" X 38" (9.5 sq. ft.) – – 04691 Fiberglass and SMC Cloth -36" X 38" (9.5 sq. ft.) – – USE APPLICATOR GUN #41398-MANUAL OR #41396-PNEUMATIC. USE 24 ELEMENT MIXING NOZZLE #04628. PART NUMBER DESCRIPTION 41396 Pneumatic Applicator Gun 400ml 41398 Manual Applicator Gun 400ml 41397 Pneumatic Applicator Gun 600ml 04627 Mixing Tip Square 18 Element (blue) 04628 Mixing Tip Square 24 Element (green) PART NUMBER DESCRIPTION 04631 Structural Backing Patch 04632 Nylon Reinforcing Tape 04623 Plastic Parts Cleaner – 1 quart 82780 Panel & Adhesive Cleaner – 1 quart FOR TECHNICAL HELP: 1 866 879-3761 ® OEM APPROVED ® Applicator Gun and Mixing Nozzle Guide Urethane Adhesives Road Worthy, Shop Tested, OEM Approved: Truck Line Adhesives SMC/FRP Fiberglass Repair andPanel Bonding 400ml 1:1 Cartridge PART OEM APPROVED CLAMPING OR SANDING OR NUMBER PLIOGRIP® NO. OPEN TIME WORK TIME FIXTURE TIME PAINTING TIME 04671 7773 3 minutes 3-1/2 minutes 10 minutes 30 minutes 04672 7779 10 minutes 17 minutes 30 minutes 1 hour 04673 7770 35 minutes 50 minutes 1-1/2 hours 3 hours USE APPLICATOR GUN #41398-MANUAL OR #41396-PNEUMATIC. USE 18 ELEMENT MIXING NOZZLE #04627 600ml 1:1 Cartridge PART OEM APPROVED CLAMPING OR SANDING OR NUMBER PLIOGRIP® NO. OPEN TIME WORK TIME FIXTURE TIME PAINTING TIME 04677 7773 3 minutes 3-1/2 minutes 10 minutes 30 minutes 04678 7779 10 minutes 17 minutes 30 minutes 60 minutes 04679 7770 35 minutes 50 minutes 90 ...
Otros modelos de este manual:Otras herramientas - Urethene Adhesive (339.01 kb)