Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
See pages 7-10 for more details. 2 FEATURES HDMI 1.3 Features • 225 MHz (up to 12 bit YUV 444 @ 1080p) • Deep Color • Dolby TrueHD and DTS-HD Master Audio • Lip-Sync Features • Simultaneously displays a single Hi Def source on up to four (4) HDTV displays without signal loss. • Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080p and 1920x1200@60 Hz. • 3DTV Pass-Through • Fast Switching Technology for quick and responsive HDMI signal routing. • Auto-EDID Management for rapid integration of sources and display devices. • Supports modern advanced digital audio formats including LPCM 7.1 audio, Dolby Digital Plus, Dolby TrueHD, and DTS-HD Master Audio. • Supports the use of DVI sources and DVI displays with an HDMI-to-DVI converter cable or adapter. • Input and output cables can be as long as 15 feet when using 8-bit or 12-bit color. The length of input and output cables also depends on the quality of cables used. • This product is HDMI-compliant and HDCP-compliant. Package Includes (1) GefenToolBox 1:4 Splitter for HDMI (1) 6 ft. HDMI cable (M-M) (1) 5V DC Locking Power Supply (1) User Manual 3 PANEL LAYOUT 2 1 3 7 45 6 4 PANEL DESCRIPTIONS 1 HDMI Output Ports 1-4 Connect HDMI-compliant display device(s) to any of these output ports. 2 Audio Channel Selection Switch This switch will modify the EDID to specify the number of supported audio channels when using the INTERNAL EDID mode. This setting will not affect the EDID information when using the EXTERNAL EDID mode. 3 EDID Mode Selection Switch This switch will control the location of the EDID that will be sent to the source device. The options are EXTERNAL and INTERNAL. Please see pages 7-11 for more information. 4 USB Service Port Mini-USB service port used for upgrading the firmware. 5 Locking HDMI Port Connect an HDMI source device to this port. The signal from this port will be replicated to all HDMI output ports. Please see the Features section on page 3 for supported HDMI 1.3 features. 6 5V DC Locking Power Receptacle Connect the included 5V DC locking power supply between this receptacle and a power source. Only use the power supply supplied with this unit. Screw the locking power tip into the socket on the Splitter until it fi ts snugly. 7 Power Indicator LED This LED will become active once the included 5V DC locking power supply has been properly connected to the unit and a power source. 5 CONNECTING AND OPERATING THE GEFENTOOLBOX 1:4 SPLITTER FOR HDMI How to Connect the GefenToolBox 1:4 Splitter for HDMI 1. Use the supplied HDMI cable to connect the source device to the HDMI input port of the GefenToolBox 1:4 Splitter for HDMI. 2. Use additional user-supplied HDMI cables to connect up to 4 HDMI- compliant displays to the output ports on the 1:4 Switcher for HDMI. 3. Connect the included 5V DC power supply to the power receptacle on the Splitter. 4. Connect the other end of the power supply to an available power outlet. How to Operate the GefenToolBox 1:4 Splitter for HDMI The GefenToolBox 1:4 Splitter for HDMI does not require any configuration to begin splitting the incoming HDMI input signal. However, depending on the features required by the user, the EDID Mode and Audio Channel Selection switches may need to be adjusted. See the following section for more information on the usage of these switches. Wiring Diagram for the GefenToolBox 1:4 Splitter for HDMI 6 EDID MANAGEMENT EDID Mode Selection 1. EXTERNAL MODE: See page 9 for details on using the External EDID. 2. INTERNAL MODE: In Internal EDID Mode, a generic EDID is used for all connected devices. This is useful when sufficient EDID data is unavailable from display devices or EDID-related problems are encountered. The generic EDID is compatible with most A/V equipment on the market. Set the EDID Mode Switch on the front panel to the INT position. This mode uses a standard, pre-programmed EDID at the factory which is compatible with most A/V display devices. All video resolutions and audio formats specified in this EDID will be passed to the source device. For a complete definition of the A/V formats in this internal EDID please see page 10. NOTE: All other HDMI-capable devices/displays connected to the Output ports MUST be compatible with at least one resolution/audio format specified in this EDID. It is recommended to set a commonly supported video resolution and audio format on the source device, to be shared by all attached devices/displays. This is to ensure that a compatible signal is output to all connected devices/displays. 7 EDID MANAGEMENT Audio Channel Selection The GefenToolBox 1:4 Splitter for HDMI features a switch that will modify the supported audio formats listed in the pre-programmed EDID. This feature is useful for limiting the output of the source device to either 2 or multi-channel audio formats. NOTE: This selector switch will only affect the pre-programmed EDID in the INTERNAL (INT) EDID Mode. The GefenToolBox 1:4 Splitter for HDMI can use eith...
Otros modelos de este manual:Otras herramientas - HDMI GTB-MHDMI1.3-144-BLK (449.25 kb)