Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
The SGC2909 Retractable PC Controller is equipped with two built-in motors, which have unbalanced weights to provide vibration feedback in games that support this feature. (The Keyboard/Mouse emulation profile editor software and Dual Vibration feedback are not supported on MAC computers). CAUTION: Connection cable length should be adjusted before starting your PC or MAC game. Extending or retracting cable during game play could cause the game to malfunction or crash It could also cause a loaded profile to be dropped. Do NOT pull on the connection cable as this can damage the SGC2909 Retractable PC Controller The con nection cable should be gradually extended until the desired length is reached. System Requirements • IBM compatible personal computer with a Pentium 350 or higher processor • Microsoft Windows Vista 32 BIT (x86) 98SE,ME, 2000 or XP operating system • 32 MB of RAM or higher • 35 MB of available HDD space • Double-speed CD-ROM drive or higher • Super VGA monitor with display card supporting High Color • USB port Product Features A) Two (2) analog control sticks-Left / Right B) Four (4) digital fire buttons (1,2,3,4) C) Four shoulder triggers (5,6,7,8) D) Start & Select Button (9, 10) E) Analog Button F) Analog LED Indicator G) Built-in dual vibration (PC only) H) 8-way directional control pad. I) Mouse button J) Esc button K) Enter button 3 EN Controller Diagram Controller Diagram Controller Diagram Button Descriptions • Directional pad - Represents UP, DOWN, LEFT, RIGHT and four diagonals. Directional Pad will function as a POV (Point of View) hat during analog mode • Buttons “1”, “2”, “3”, and “4” are default fire buttons and are all digital in nature. • Left and right analog sticks - each contains two axes. Left analog stick controls the X and Y Axis. Right analog stick controls the Rz and Z axis. Also, there is a “hidden” button “11” and “12” under each stick that is activated when the analog stick is depressed inward. • Buttons “5”, “6”, “7”, and “8” are all digital shoulder buttons. • Analog Mode button -Used to switch the controller from digital to analog mode (and vice versa).Analog mode is the default mode The red LED will illuminate when the controller is in analog mode and be off in digital mode • The Start and Select buttons are digital buttons (9, 10) • The Esc button provides the same function as the esc key on your windows keyboard. Note:You must have installed the mouse and key profile editor software.This button is not MAC compatible. • The Enter button provides the same function as the Enter key on your windows keyboard. Note:You must have installed the mouse and key profile editor software.This button is not MAC compatible. • The Mouse button is used when the mouse and key profile editor emulation software is installed and it will activate mouse movement mode. Note:This button is not MAC compatible. Analog Button Use to switch between digital and analog mode Analog mode is the default mode All buttons are accessible in digital and analog mode In digital mode, the analog sticks are non-operational and the D-pad digitally controls the X and Y axis. In the analog mode, the D-pad functions as a POV hat while the left analog stick controls the X and Y axis.The right analog stick controls the Rz and Z axis.The LED below the Analog button will be illuminated when Analog mode is on 4 ENENInstallation Installation Note:The D-pad functions as a POV hat for most software titles, but may operate differently depending on the design of each individual game.You can also configure the D-pad to control the X and Y axis through the Test Page found in the SGC2909 Retractable PC Controller properties Enter & Esc Buttons These two buttons will function the same as the Enter and Esc keys found on your Windows keyboard The En ter & Esc buttons will commonly be used to select and exit menus during PC games.These controller buttons can be used as a replacement for the Enter & Esc keys found on the keyboard.You no longer need to take your hand off the controller to hit the keyboards Enter and Esc keys Note:You must install the SGC2909 Software in order for these buttons to function. If the software is not installed, these buttons will not function. Also, these buttons cannot be re-programmed with the Profile Editor. Mouse Button The mouse button is used to turn on/off mouse movement mode. By default, mouse movement is automatically assigned to the right analog stick. (This means if mouse movement mode is activated, the right analog stick will automatically control the mouse cursor ) Pressing the mouse button will turn the integrated blue LED on With the mouse LED on, moving the right analog stick will control the mouse cursor.With the mouse LED off, the right stick will return to its default Rz and Z axis control. If desired, you can use the Profile Editor to assign mouse movement to the left analog stick, but you must still press the mouse button to activate the mouse movement mode. Mouse movement wil...
Otros modelos de este manual:Otros componentes - SGC2909/27 (3.22 mb)